Your Search Results

Use materials about this topic in your textbook!

AcademicPub holds over eight million pieces of educational content - such as case studies and journal articles - for you to mix-and-match your way.

Experience the freedom of customizing your course pack with AcademicPub!

Not an educator but still interested in using this content? No problem! Visit our provider's page to contact the publisher and get permission directly.

Topic: Stators

Results

A new solid state UHF converter

1963 / IEEE
By: Wolfram, A. E.; Weiner, A. P.;

A new approach to UHF channel strip design

1963 / IEEE
By: Johnson, Francis E.; White, James F.;

Cheap electricity from French tides: The sea has demonstrated both friendly and adverse effects during the 14-year history of the Saint Malo plant

1980 / IEEE
By: Andre, H.;

A digital frequency control system for a variable speed alternator

1982 / IEEE
By: Yang, Chauming; Grannemann, W. W.;

Modeling and measurement of airgap harmonics of single-phase induction motors

1987 / IEEE
By: Natarajan, R.;

Single-Phase Hybrid Switched Reluctance Motor for Low-Power Low-Cost Applications

2011 / IEEE
By: Kaiyuan Lu; Jakobsen, U.; Rasmussen, P.O.;

Analyses of the temperature field of traveling-wave rotary ultrasonic motors

2011 / IEEE
By: Xiaolong Lu; Chunsheng Zhao; Junhui Hu;

Solid-Projectile Helical Electromagnetic Launcher With Variable Gradient Stator and Magnetically Levitated Armature

2011 / IEEE
By: Veracka, M.J.; Engel, T.G.;

Partial discharge influence on dissipation factor values during stator-bar testing

2011 / IEEE
By: Zhu, H.; Contin, A.;

Real-Time Detection of Interturn Faults in PM Drives Using Back-EMF Estimation and Residual Analysis

2011 / IEEE
By: Nahid-Mobarakeh, B.; Boileau, T.; Leboeuf, N.; Meibody-Tabar, F.; Clerc, G.;

New Axial Laminated-Structure Flux-Switching Permanent Magnet Machine With 6/7 Poles

2011 / IEEE
By: Wei Xu; Gang Lei; Youguang Guo; Yongchang Zhang; Jianguo Zhu;

A Magnetic Continuously Variable Transmission Device

2011 / IEEE
By: Carvley, S.D.; Atallah, K.; Jiabin Wang;

A Novel Approach to the Analysis of the Axial-Flux Permanent-Magnet Generator With Coreless Stator Supplying a Rectifier Load

2011 / IEEE
By: Ding, K.; Cheng, K.W.E.; Weimin Wang; Meng, L.C.;

Design and Analysis of a New Flux Memory Doubly Salient Motor Capable of Online Flux Control

2011 / IEEE
By: Wenlong Li; Zheng Wang; Ming Cheng; Dajian Chen; Li Quan; Xiaoyong Zhu;

Design Reconsiderations of High Speed Permanent Magnet Hybrid Excitation Motor for Main Spindle Drive in Machine Tools Based on Experimental Results of Prototype Machine

2011 / IEEE
By: Sridharbabu, M.; Matsui, N.; Kosaka, T.;

A New Fault-Tolerant Permanent-Magnet Machine for Electric Vehicle Applications

2011 / IEEE
By: Wensheng Gong; Guohai Liu; Qian Chen; Wenxiang Zhao;

Level-Set-Based Optimal Stator Design of Interior Permanent-Magnet Motor for Torque Ripple Reduction Using Phase-Field Model

2011 / IEEE
By: Sunghoon Lim; Jung-Pyo Hong; Seungjae Min;

Dynamic Stability Analysis of a Tidal Power Generation System Connected to an Onshore Distribution System

2011 / IEEE
By: Chao-Nan Li; Li Wang;

Modeling and Ride-Through Control of Doubly Fed Induction Generators During Symmetrical Voltage Sags

2011 / IEEE
By: Cezar Rabelo, B.; Rocha Silva, S.; de Sousa, C.V.; Flores Mendes, V.; Hofmann, W.;

Interturn Stator Faults Analysis of a 200-MVA Hydrogenerator During Transient Operation Using FEM

2011 / IEEE
By: Safacas, A.N.; Dallas, S.E.; Kappatou, J.C.;

Motor and Generator Windings

2011 / IEEE
By: Sasic, M.; Stone, G.C.; Culbert, I.; Dunn, D.;

Principles in Motor Protection

2011 / IEEE
By: Vico, J.; Hunt, R.;

Stator-Flux-Oriented Fault-Tolerant Control of Flux-Switching Permanent-Magnet Motors

2011 / IEEE
By: Chau, K.T.; Ming Cheng; Wenxiang Zhao; Wenlong Li; Jinghua Ji; Hongyun Jia; Wei Hua;

Improved Analytical Model for Electromagnetic Analysis of Axial Flux Machines With Double-Sided Permanent Magnet Rotor and Coreless Stator Windings

2011 / IEEE
By: Jang-Young Choi; Seok-Myeong Jang; Kyoung-Jin Ko; Sung-Ho Lee;

Practical optimum design based on magnetic balance and copper loss minimization for a single-phase line start PM motor

2011 / IEEE
By: Byung-il Kwon; Byung-taek Kim; Soo-whang Baek;

Analysis of the Oversaturated Effect in Hybrid Excited Flux-Switching Machines

2011 / IEEE
By: Gan Zhang; Jianning Dong; Wei Hua; Ming Cheng;

Design and Analysis of Linear Stator Permanent Magnet Vernier Machines

2011 / IEEE
By: Chau, K.T.; Yi Du; Zheng Wang; Wei Hua; Yubin Wang; Ying Fan; Ming Cheng;

Design and Comparison of Vernier Permanent Magnet Machines

2011 / IEEE
By: Ho, S.L.; Fu, W.N.; Shuangxia Niu;

Eddy-Current Loss Prediction in the Rotor Magnets of a Permanent Magnet Synchronous Generator With Modular Winding Feeding a Rectifier Load

2011 / IEEE
By: Long Jin; Jianning Dong; Yunkai Huang; Youguang Guo; Jianguo Zhu;

Characteristics of Ferromagnetic Materials Due to Uneven Magnetic Saturation

2011 / IEEE
By: Dong-Seok Ryu; Ki-Chan Kim; Min-Gyu Kim;

Sputtering of SmCo Thin Films and Integration Into a Ferrofluidic Microactuator

2011 / IEEE
By: Hoheisel, D.; Jue Chen; Rising, L.;

Analytical Magnetic Field Analysis and Prediction of Cogging Force and Torque of a Linear and Rotary Permanent Magnet Actuator

2011 / IEEE
By: Heyun Lin; Shuhua Fang; Ping Jin; Xianbing Wang; Yunkai Huang; Zhu, Z.Q.;

A Technique of Torque Ripple Reduction in Interior Permanent Magnet Synchronous Motor

2011 / IEEE
By: Dae-Hyun Koo; Pil-Wan Han; Jae-Hak Choi; Yon-Do Chun; Un-Jae Seo; Ju Lee;

Improvements in Brushless Doubly Fed Reluctance Generators Using High-Flux-Density Steels and Selection of the Correct Pole Numbers

2011 / IEEE
By: Dorrell, D.G.; Betz, R.E.; Knight, A.M.;

A Novel Design of Modular Three-Phase Permanent Magnet Vernier Machine With Consequent Pole Rotor

2011 / IEEE
By: Byung-Chul Woo; Ji-Won Kim; Shi-Uk Chung; Dae-Hyun Koo; Ji-Young Lee; Do-Kwan Hong;

Eddy-Current Calculation of Solid Components in Fractional Slot Axial Flux Permanent Magnet Synchronous Machines

2011 / IEEE
By: Dae-Hyun Koo; Chang-Hum Cho; Da-Woon Choi; Jian Li; Yun-Hyun Cho;

A cylindrical traveling wave ultrasonic motor using a circumferential composite transducer

2011 / IEEE
By: Weishan Chen; Junkao Liu; Yingxiang Liu;

Topology Optimization of the Stator for Minimizing Cogging Torque of IPM Motors

2011 / IEEE
By: Nishiwaki, S.; Izui, K.; Jae Seok Choi; Nomura, T.; Kawamoto, A.;

Analysis of Novel Brushless DC Motors Made of Soft Magnetic Composite Core

2012 / IEEE
By: Quang Viet Ho; Takahashi, K.; Ishikawa, T.; Kurita, N.; Matsunami, M.;

Design and Analysis of a Novel Grid-Connected to Rotor Type Doubly Fed Induction Machine

2012 / IEEE
By: Yong-Min You; Byung-Il Kwon; Lipo, T.A.;

Coupled Numerical Simulation Between Electromagnetic and Structural Models. Influence of the Supply Harmonics for Synchronous Machine Vibrations

2012 / IEEE
By: Lanfranchi, V.; Pellerey, P.; Friedrich, G.;

Geometry Optimization of PMSMs Comparing Full and Fractional Pitch Winding Configurations for Aerospace Actuation Applications

2012 / IEEE
By: Tsampouris, E.M.; Kladas, A.G.; Beniakar, M.E.;

Finite Element Analysis and Evaluation of Stator Insulation in High Voltage Synchronous Motor

2012 / IEEE
By: Jian Guo Zhu; Qiuhui Zhang; Haibo Li; Jie Qiu; Shuhong Wang; Jun Zhang; Youguang Guo;

An Extended Field Reconstruction Method for Modeling of Switched Reluctance Machines

2012 / IEEE
By: Wei Wang; Chenjie Lin; Fahimi, B.; McDonough, M.;

Frequency Domain Evaluation of Transient Finite Element Simulations of Induction Machines

2012 / IEEE
By: Biro, O.; Rainer, S.; Weilharter, B.; Stermecki, A.;

Two-Dimensional Analytical Calculation of Magnetic Field and Electromagnetic Torque for Surface-Inset Permanent-Magnet Motors

2012 / IEEE
By: Rezzoug, A.; Mezani, S.; Lubin, T.;

Nonlinear Equivalent Magnetic Circuit Analysis for Linear Flux-Switching Permanent Magnet Machines

2012 / IEEE
By: Shigui Zhou; Lei Huang; Chongxue Jiang; Minqiang Hu; Haitao Yu;

Comparison of Evolutionary and Rule-Based Strategies for Electromagnetic Device Optimization

2012 / IEEE
By: Jun Ouyang; Lowther, D.A.;

A Convenient Mesh Rotation Method of Finite Element Analysis Using Sub-Matrix Transformation Approach

2012 / IEEE
By: Fu, W.N.; Ho, S.L.; Shuangxia Niu; Jianguo Zhu;

Importance of Iron-Loss Modeling in Simulation of Wound-Field Synchronous Machines

2012 / IEEE
By: Rasilo, P.; Arkkio, A.; Belahcen, A.;

Analytical Approach for Air-Gap Modeling of Field-Excited Flux-Switching Machine: No-Load Operation

2012 / IEEE
By: Hoang, E.; Gaussens, B.; Gabsi, M.; Lecrivain, M.; Saint-Michel, J.; de la Barriere, O.;

Analysis and Design of Passive Magnetic Bearing and Damping System for High-Speed Compressor

2012 / IEEE
By: Kun Wang; Jinji Sun; Yun Le; Jiancheng Fang;

Review of Design Solutions for Internal Permanent-Magnet Machines Cogging Torque Reduction

2012 / IEEE
By: Davoli, M.; Bellini, A.; Lorenzani, E.; Immovilli, F.; Bianchini, C.;

Biorthogonal Shape Functions for Nonconforming Sliding Interfaces in 3-D Electrical Machine FE Models With Motion

2012 / IEEE
By: Hameyer, K.; Henrotte, F.; Lange, E.;

A New Topology of Low Speed Doubly Salient Brushless DC Generator for Wind Power Generation

2012 / IEEE
By: Yangyang Tao; Yangguang Yan; Zhuoran Zhang;

Influence of Soft Magnetic Material in a Permanent Magnet Synchronous Machine With a Commercial Induction Machine Stator

2012 / IEEE
By: Van den Bossche, A.; Sergeant, P.; Hofman, I.;

Evaluation of a Simple Lamination Stacking Method for the Teeth of an Axial Flux Permanent-Magnet Synchronous Machine With Concentrated Stator Windings

2012 / IEEE
By: Vansompel, H.; Van den Bossche, A.; Dupre, L.; Sergeant, P.;

Mesh Decomposition for Efficient Parallel Computing of Electrical Machines by Means of FEM Accounting for Motion

2012 / IEEE
By: Lange, E.; Bohmer, S.; Hameyer, K.; Bischof, C.; Cramer, T.; Hafner, M.;

Core Tester Iron Losses Segregation by Finite Element Modeling

2012 / IEEE
By: Schlegel, J.P.; Espindola, A.A.; Bastos, J.P.A.; Iamamura, B.A.T.; Batistela, N.J.; Sadowski, N.;

Measurement and Modeling of 2-D Magnetostriction of Nonoriented Electrical Steel

2012 / IEEE
By: Anderson, P.I.; Moses, A.J.; Somkun, S.;

A Novel Method of Magnetizing Inductance Investigation of Self-Excited Induction Generators

2012 / IEEE
By: Rafajdus, P.; Kalamen, L.; Hrabovcova, V.; Sekerak, P.;

Manufacturing Tolerances: Estimation and Prediction of Cogging Torque Influenced by Magnetization Faults

2012 / IEEE
By: van der Giet, M.; Coenen, I.; Hameyer, K.;

3-D Finite Element Analysis of Additional Eddy Current Losses in Induction Motors

2012 / IEEE
By: Biro, O.; Stermecki, A.; Ingruber, R.; Ofner, G.; Rainer, S.; Bakhsh, I.;

Numerical Prediction of Electromagnetic Vibration and Noise of Permanent-Magnet Direct Current Commutator Motors With Rotor Eccentricities and Glue Effects

2012 / IEEE
By: Guhuan He; Dayue Chen; Qin, R.; Zhenyu Huang;

Development of a Bendable Permanent-Magnet Tubular Linear Motor

2012 / IEEE
By: Gunther, R.; Urban, C.; Witt, R.; Richter, R.; Nagel, T.;

3-D Finite Element Method Analysis of Additional Load Losses in the End Region of Permanent-Magnet Generators

2012 / IEEE
By: Puranen, J.; Nerg, J.; Pyrhonen, J.; Hamalainen, H.M.;

Analytical Modeling of the Open-Circuit Magnetic Field in Axial Flux Permanent-Magnet Machines With Semi-Closed Slots

2012 / IEEE
By: Tiegna, H.; Barakat, G.; Amara, Y.; Bellara, A.;

A New Concept of Modular Permanent Magnet and Soft Magnetic Compound Motor Dedicated to Widespread Application

2012 / IEEE
By: Harribey, D.; Nogarede, B.; Henaux, C.;

Analytical Armature Reaction Field Distribution of Slotless Brushless Machines With Inset Permanent Magnets

2012 / IEEE
By: Rahideh, A.; Korakianitis, T.;

Influence of Copper Plating on Electromagnetic and Temperature Fields in a High-Speed Permanent-Magnet Generator

2012 / IEEE
By: Yi Ran; Zhang Xiaochen; Qiu Hongbo; Li Weili;

Homopolar 2-Pole Radial Permanent-Magnet Biased Magnetic Bearing With Low Rotating Loss

2012 / IEEE
By: Wang Xi; Fang Jiancheng; Fan Yahong; Tang Enqiong; Wei Tong;

Configuration Impacts on Eccentricity Fault Detection in Permanent Magnet Synchronous Motors

2012 / IEEE
By: Faiz, J.; Ebrahimi, B.M.;

New Methods for Arc Permanent Magnet Linear Synchronous Motor to Decrease Torque Ripple

2012 / IEEE
By: Yong Kun Fan; Wen Li Ma; Chang Jiu Jian; Hui Yang;

Reduction on Cogging Torque in Flux-Switching Permanent Magnet Machine by Teeth Notching Schemes

2012 / IEEE
By: Daohan Wang; Sang-Yong Jung; Xiuhe Wang;

Impact of Soft Magnetic Material on Construction of Radial Flux Electrical Machines

2012 / IEEE
By: Alakula, M.; Reinap, A.;

AC Magnetic Circuits Using Nonsegmented Shifted Grain Oriented Electrical Steel Sheets: Impact on Induction Machine Magnetic Noise

2012 / IEEE
By: Demian, C.; Belgrand, T.; Brudny, J.-F.; Cassoret, B.;

A Novel Transverse-Flux Moving-Magnet Linear Oscillatory Actuator

2012 / IEEE
By: Yunyue Ye; Minghu Yu; Qinfen Lu; Yuqiu Zhang;

Quantitative Comparison of Flux-Switching Permanent-Magnet Motors With Interior Permanent Magnet Motor for EV, HEV, and PHEV Applications

2012 / IEEE
By: Ruiwu Cao; Ming Cheng; Mi, C.;

Experimental Characterization of the Iron Losses Variability in Stators of Electrical Machines

2012 / IEEE
By: Mipo, J.C.; Genet, S.; Benabou, A.; Ramarotafika, R.;

Torque Control of Switched Reluctance Motors

2012 / IEEE
By: Garcia, A.; Moron, C.; Somolinos, J.A.; Tremps, E.;

Subdomain Model for Predicting Magnetic Field in Slotted Surface Mounted Permanent-Magnet Machines With Rotor Eccentricity

2012 / IEEE
By: Changsheng Zhu; Jiajing Fu;

Influence of Additional Air Gaps Between Stator Segments on Cogging Torque of Permanent-Magnet Machines Having Modular Stators

2012 / IEEE
By: Ombach, G.; Azar, Z.; Zhu, Z.Q.;

Integral Design and Analysis of Passive Magnetic Bearing and Active Radial Magnetic Bearing for Agile Satellite Application

2012 / IEEE
By: Wang Xi; Zheng Shiqiang; Han Bangcheng; Yuan Qian;

Analytical Prediction of Magnetic Field in Parallel Double Excitation and Spoke-Type Permanent-Magnet Machines Accounting for Tooth-Tips and Shape of Polar Pieces

2012 / IEEE
By: Ibtiouen, R.; Boughrara, K.; Lubin, T.;

Static, Dynamic, and Mixed Eccentricity Faults Diagnosis in Switched Reluctance Motors Using Transient Finite Element Method and Experiments

2012 / IEEE
By: Torkaman, H.; Yadegari, P.; Afjei, E.;

Performance Analysis of Saturated Induction Motors by Virtual Tests

2012 / IEEE
By: Kazemi, M.; Faiz, J.; Ojaghi, M.; Rezaei, M.;

Novel Industrial Wireless Sensor Networks for Machine Condition Monitoring and Fault Diagnosis

2012 / IEEE
By: Bergmann, N.W.; Liqun Hou;

Analysis of a Novel Magnetization Pattern for 2-DoF Rotary-Linear Actuators

2012 / IEEE
By: Meessen, K.J.; Lomonova, E.A.; Paulides, J.J.H.;

Super-Multipolar Permanent Magnet Reluctance Generator Designed for Small-Scale Wind-Turbine Generation

2012 / IEEE
By: Ichinokura, O.; Nakamura, K.;

Analysis and Modeling of Rotor Slot Enclosure Effects in High-Speed Induction Motors

2012 / IEEE
By: Cavagnino, A.; Bojoi, R.I.; Boglietti, A.; Miotto, A.; Guglielmi, P.;

Eddy-Current Loss Modeling for a Form-Wound Induction Motor Using Circuit Model

2012 / IEEE
By: Arkkio, A.; Khang, H.V.;

Air-Gap Flux Density Characteristics of Salient Pole Synchronous Permanent-Magnet Machines

2012 / IEEE
By: Gerling, D.; Dajaku, G.;

Temperature Estimation of IPMSM Using Thermal Equivalent Circuit

2012 / IEEE
By: Jae-Woo Jung; Kyu-Seob Kim; Byeong-Hwa Lee; Young-Kyoun Kim; Jung-Pyo Hong;

Characterization and Experimental Verification of the Axial Unbalanced Magnetic Force in Brushless DC Motors

2012 / IEEE
By: Kim, J.Y.; Jang, G.H.; Sung, S.J.;

Precise Magnetic Field Modeling Techniques of Rotary Machines Using Transient Finite-Element Method

2012 / IEEE
By: Ho, S.L.; Li, H.L.; Fu, W.N.;

Improved Analytical Modeling of Axial Flux Machine With a Double-Sided Permanent Magnet Rotor and Slotless Stator Based on an Analytical Method

2012 / IEEE
By: Jang-Young Choi; Yu-Seop Park; Jae-Hoon Jeong; So-Young Sung; Seok-Myeong Jang;

A Novel Magnetic Flux Weakening Method of Permanent Magnet Synchronous Motor for Electric Vehicles

2012 / IEEE
By: Ki-Chan Kim;

Stochastic Modeling of Soft Magnetic Properties of Electrical Steels: Application to Stators of Electrical Machines

2012 / IEEE
By: Benabou, A.; Ramarotafika, R.; Clenet, S.;

Design and Optimization of Arc Permanent Magnet Synchronous Motor Used on Large Telescope

2012 / IEEE
By: Chang Jiu jian; Huang Jin long; Ma Wen li;

Design of Brushless Doubly-Fed Machines Based on Magnetic Circuit Modeling

2012 / IEEE
By: McMahon, R.A.; You-Chiuan Hsu; I-Hsien Lin; Min-Fu Hsieh;

Return To Top

Topic: Stators

Results

Next Page