Your Search Results

Use materials about this topic in your textbook!

AcademicPub holds over eight million pieces of educational content - such as case studies and journal articles - for you to mix-and-match your way.

Experience the freedom of customizing your course pack with AcademicPub!
Not an educator but still interested in using this content? No problem! Visit our provider's page to contact the publisher and get permission directly.

Topic: Rotors

Results

A high quality economical UHF tuner
1964 / IEEE
By: Reynolds, Wayne H.;
A new approach to UHF channel strip design
1963 / IEEE
By: Johnson, Francis E.; White, James F.;
Automatic calibration of rotary-vane attenuators on a modulated subcarrier system
1976 / IEEE
By: Cummings, Paul; Herman, Peter; Watton, Donald O.; Warner, Frank L.;
Power/energy developments: High efficiencies and less downtime are sought by utilities as the oil squeeze worsens
1980 / IEEE
By: Kaplan, Gadi;
Modeling and measurement of airgap harmonics of single-phase induction motors
1987 / IEEE
By: Natarajan, R.;
A digital tachometer for fast detection of speed variation in kiln drives
1987 / IEEE
By: Ahmad, M.; Ahmad, Z.; Ahmad, W.;
Phase compensation of the three op amp instrumentation amplifier
1987 / IEEE
By: White, D.R.;
Superconducting thin-film gyroscope readout for Gravity Probe-B
1987 / IEEE
By: Cheung, W. Stephen; Lockhart, James M.; Gill, Dale K.;
Fabrication of a Fractional Order Capacitor With Desired Specifications: A Study on Process Identification and Characterization
2011 / IEEE
By: Goswami, B.; Biswas, K.; Das, S.; Sivarama Krishna, M.;
Single-Phase Hybrid Switched Reluctance Motor for Low-Power Low-Cost Applications
2011 / IEEE
By: Kaiyuan Lu; Jakobsen, U.; Rasmussen, P.O.;
Design and Analysis of a Novel Axial-Flux Electric Machine
2011 / IEEE
By: Ho, S.L.; Fu, W.N.; Shuangxia Niu;
Analyses of the temperature field of traveling-wave rotary ultrasonic motors
2011 / IEEE
By: Xiaolong Lu; Chunsheng Zhao; Junhui Hu;
Development of a Novel Transverse Flux Wheel Motor
2011 / IEEE
By: Yu-Sheng Hsu; Mi-Ching Tsai;
Subassembly Magnetization Strategies for a Transverse Flux Motor Equipped With NdFeB Magnet
2011 / IEEE
By: Yu-Sheng Hsu; Min-Fu Hsieh; Mi-Ching Tsai;
The Improvement of the Noninvasive Power-Supply System Using Magnetic Coupling for Medical Implants
2011 / IEEE
By: Suzuki, S.; Ishihara, M.; Kobayashi, Y.;
Effect of Winding Asymmetries and Winding Connection on Small Synchronous Machines
2011 / IEEE
By: Popescu, M.; Dorrell, D.G.;
Torque Analysis of a Novel Non-Contact Permanent Variable Transmission
2011 / IEEE
By: Jing-Wei Xing; Yong Li; Zhi-Jun Yin; Yong-Ping Lu;
New Axial Laminated-Structure Flux-Switching Permanent Magnet Machine With 6/7 Poles
2011 / IEEE
By: Wei Xu; Gang Lei; Youguang Guo; Yongchang Zhang; Jianguo Zhu;
A Magnetic Continuously Variable Transmission Device
2011 / IEEE
By: Carvley, S.D.; Atallah, K.; Jiabin Wang;
A Novel Approach to the Analysis of the Axial-Flux Permanent-Magnet Generator With Coreless Stator Supplying a Rectifier Load
2011 / IEEE
By: Ding, K.; Cheng, K.W.E.; Weimin Wang; Meng, L.C.;
Analytical Prediction of Optimal Split Ratio for Fractional-Slot External Rotor PM Brushless Machines
2011 / IEEE
By: Zhu, Z.Q.; Yang Shen;
Design Reconsiderations of High Speed Permanent Magnet Hybrid Excitation Motor for Main Spindle Drive in Machine Tools Based on Experimental Results of Prototype Machine
2011 / IEEE
By: Sridharbabu, M.; Matsui, N.; Kosaka, T.;
A Novel Axial Field Flux-Switching Permanent Magnet Wind Power Generator
2011 / IEEE
By: Mingyao Lin; Zhu, Z.Q.; Xuming Zhao; Xin Li; Li Hao;
Design Optimization of Multistack Coreless Disk-Type Hysteresis Motor
2011 / IEEE
By: Darabi, A.; Hassannia, A.; Sadeghi, M.;
Online State Estimation of a Synchronous Generator Using Unscented Kalman Filter From Phasor Measurements Units
2011 / IEEE
By: Ghahremani, E.; Kamwa, I.;
Quantifying the Energy Efficiency of Motors on Inverters
2011 / IEEE
By: Melfi, M.J.;
Motor and Generator Windings
2011 / IEEE
By: Sasic, M.; Stone, G.C.; Culbert, I.; Dunn, D.;
Principles in Motor Protection
2011 / IEEE
By: Vico, J.; Hunt, R.;
A Novel Flux-Controllable Vernier Permanent-Magnet Machine
2011 / IEEE
By: Chau, K.T.; Jin Zhong; Chunhua Liu;
Rotor Eddy Current Loss Calculation and Thermal Analysis of Permanent Magnet Motor and Generator
2011 / IEEE
By: Nannan Zhao; Weiguo Liu; Zhu, Z.Q.;
Improved Analytical Model for Electromagnetic Analysis of Axial Flux Machines With Double-Sided Permanent Magnet Rotor and Coreless Stator Windings
2011 / IEEE
By: Jang-Young Choi; Seok-Myeong Jang; Kyoung-Jin Ko; Sung-Ho Lee;
Characteristic Analysis of Permanent Magnet Synchronous Machines Under Different Construction Conditions of Rotor Magnetic Circuits by Using Electromagnetic Transfer Relations
2011 / IEEE
By: Yu-Seop Park; Min-Mo Koo; Seok-Myeong Jang; Sung-Ho Lee; Jang-Young Choi;
Design Considerations for Achieving High Radial Stiffness in an Attraction-Type Magnetic Bearing With Control in a Single Direction
2011 / IEEE
By: da Silva, I.; Horikawa, O.; Cardoso, J.R.;
Practical optimum design based on magnetic balance and copper loss minimization for a single-phase line start PM motor
2011 / IEEE
By: Byung-il Kwon; Byung-taek Kim; Soo-whang Baek;
Harmonic Analysis and Comparison of Permanent Magnet Vernier and Magnetic-Geared Machines
2011 / IEEE
By: Jiangui Li; Wenlong Li; Chau, K.T.;
Analysis of the Oversaturated Effect in Hybrid Excited Flux-Switching Machines
2011 / IEEE
By: Gan Zhang; Jianning Dong; Wei Hua; Ming Cheng;
Design and Comparison of Vernier Permanent Magnet Machines
2011 / IEEE
By: Ho, S.L.; Fu, W.N.; Shuangxia Niu;
Eddy-Current Loss Prediction in the Rotor Magnets of a Permanent Magnet Synchronous Generator With Modular Winding Feeding a Rectifier Load
2011 / IEEE
By: Long Jin; Jianning Dong; Yunkai Huang; Youguang Guo; Jianguo Zhu;
A Method for Acquiring the Torque of a Magnetic Pump
2011 / IEEE
By: Hashi, S.; Kim, S.H.; Ishiyama, K.;
Evaluation of Magnetic Force Distribution and Torque Due to Smooth Interaction Body Force Density in Permanent-Magnet Materials
2011 / IEEE
By: Geun-Young Jeong; Se-Hee Lee; Heung-Geun Kim; Hong-Joon Kim; Hong-Soon Choi;
Performance evaluation of dual-frequency driving plate ultrasonic motor based on an analytical model
2011 / IEEE
By: Ming Yang; Yafei Pang; Chaodong Li; Shiyang Li; Wei He; Xuying Chen;
Examination of an Interior Permanent Magnet Type Axial Gap Motor for the Hybrid Electric Vehicle
2011 / IEEE
By: Arakawa, T.; Mitani, H.; Hojo, H.; Ozaki, O.; Inoue, K.; Ogasawara, S.; Takemoto, M.;
Evaluation of Magnetic Suspension Performance in a Multi-Consequent-Pole Bearingless Motor
2011 / IEEE
By: Nakamura, R.; Asama, J.; Chiba, A.; Sugimoto, H.;
Optimization of an 80 kW Radial-Radial Flux Compound-Structure Permanent-Magnet Synchronous Machine Used for HEVs
2011 / IEEE
By: Weinong Fu; Weiming Tong; Shuang Yu; Jingang Bai; Chengde Tong; Yong Liu;
Electromagnetic Performance Analysis of Wind Power Generator With Outer Permanent Magnet Rotor Based on Turbine Characteristics Variation Over Nominal Wind Speed
2011 / IEEE
By: Kyoung-Jin Ko; Dae-Joon You; Han-Wook Cho; Ji-Hoon Park; Seok-Myeong Jang;
Performance Improvement in High-Performance Brushless Rare-Earth Magnet Motors for Hybrid Vehicles by Use of High Flux-Density Steel
2011 / IEEE
By: Knight, A.M.; Dorrell, D.G.; Popescu, M.;
Dynamic Analysis of Planetary-Type Magnetic Gear Based on Reluctance Network Analysis
2011 / IEEE
By: Ichinokura, O.; Nakamura, K.; Fukuoka, M.;
Experimental Verification and Effects of Step Skewed Rotor Type IPMSM on Vibration and Noise
2011 / IEEE
By: Geun-Ho Lee; Jung-Pyo Hong; Do-Jin Kim; Jae-Woo Jung; Seong-Min Jeon;
A Technique of Torque Ripple Reduction in Interior Permanent Magnet Synchronous Motor
2011 / IEEE
By: Dae-Hyun Koo; Pil-Wan Han; Jae-Hak Choi; Yon-Do Chun; Un-Jae Seo; Ju Lee;
Improvements in Brushless Doubly Fed Reluctance Generators Using High-Flux-Density Steels and Selection of the Correct Pole Numbers
2011 / IEEE
By: Dorrell, D.G.; Betz, R.E.; Knight, A.M.;
A Novel Design of Modular Three-Phase Permanent Magnet Vernier Machine With Consequent Pole Rotor
2011 / IEEE
By: Byung-Chul Woo; Ji-Won Kim; Shi-Uk Chung; Dae-Hyun Koo; Ji-Young Lee; Do-Kwan Hong;
Eddy-Current Calculation of Solid Components in Fractional Slot Axial Flux Permanent Magnet Synchronous Machines
2011 / IEEE
By: Dae-Hyun Koo; Chang-Hum Cho; Da-Woon Choi; Jian Li; Yun-Hyun Cho;
Influence of Multiple Air Gaps on the Performance of Electrical Machines With (Semi) Halbach Magnetization
2011 / IEEE
By: Yang Tang; Meessen, K.J.; Gysen, B.L.J.; Paulides, J.J.H.; Lomonova, E.A.;
Rotor Natural Frequency in High-Speed Permanent-Magnet Synchronous Motor for Turbo-Compressor Application
2011 / IEEE
By: Han-Wook Cho; Seok-Myeong Jang; Hyun-Jae Shin; Jang-Young Choi; Kyoung-Jin Ko;
Unbalanced Magnetic Pull in Cage Induction Machines for Fixed-Speed Renewable Energy Generators
2011 / IEEE
By: Dorrell, D.G.; Mueller, M.A.; Min-Fu Hsieh; Shek, J.;
Equivalent Formulas for Global Magnetic Force Calculation From Finite Element Solution
2012 / IEEE
By: Demenko, A.; Wojciechowski, R.M.; Lyskawinski, W.;
Topology Optimization of Rotor Structure in Brushless DC Motor With Concentrated Windings Using Genetic Algorithm Combined With Cluster of Material
2012 / IEEE
By: Ishikawa, T.; Nakayama, K.;
Effects of MMF Harmonics on Rotor Eddy-Current Losses for Inner-Rotor Fractional Slot Axial Flux Permanent Magnet Synchronous Machines
2012 / IEEE
By: Jian Li; Da-Woon Choi; Dong-Hyeok Son; Yun-Hyun Cho;
Characteristics Analysis of Large High Speed Induction Motors Using 3-D Finite Element Method
2012 / IEEE
By: Tada, S.; Yamada, S.; Fukushima, N.; Kuramochi, S.; Yamazaki, K.;
Design and Analysis of a Novel Grid-Connected to Rotor Type Doubly Fed Induction Machine
2012 / IEEE
By: Yong-Min You; Byung-Il Kwon; Lipo, T.A.;
Numerical Investigation on Torque Harmonics Reduction of Interior PM Synchronous Motor With Concentrated Winding
2012 / IEEE
By: Yong-Jae Kim; Seungho Lee; Sang-Yong Jung;
Analytical Prediction of Cogging Torque for Spoke Type Permanent Magnet Machines
2012 / IEEE
By: Zhou, P.; Lin, D.; Lin, S.; Lu, C.;
Low Torque Ripple Rotor Design of the Interior Permanent Magnet Motor Using the Multi-Phase Level-Set and Phase-Field Concept
2012 / IEEE
By: Jung-Pyo Hong; Seungjae Min; Sunghoon Lim;
Performance Comparison of Longitudinal Flux and Transverse Flux Permanent Magnet Machines for Turret Applications With Large Diameter
2012 / IEEE
By: Byoung-Uk Nam; Doo-Hwan Park; Byung-Chul Woo; Do-Kwan Hong; Ji-Young Lee;
Coupled Numerical Simulation Between Electromagnetic and Structural Models. Influence of the Supply Harmonics for Synchronous Machine Vibrations
2012 / IEEE
By: Lanfranchi, V.; Pellerey, P.; Friedrich, G.;
An Extended Field Reconstruction Method for Modeling of Switched Reluctance Machines
2012 / IEEE
By: Wei Wang; Chenjie Lin; Fahimi, B.; McDonough, M.;
Efficient Iterative Integral Technique for Computation of Fields in Electric Machines with Rotor Eccentricity
2012 / IEEE
By: Hantila, F.I.; Ciric, I.R.; Marinescu, S.; Maricaru, M.;
Optimum Design Criteria for Maximum Torque and Efficiency of a Line-Start Permanent-Magnet Motor Using Response Surface Methodology and Finite Element Method
2012 / IEEE
By: Jung-Ho Lee; Jung-Pyo Hong; Byeong-Hwa Lee;
Frequency Domain Evaluation of Transient Finite Element Simulations of Induction Machines
2012 / IEEE
By: Biro, O.; Rainer, S.; Weilharter, B.; Stermecki, A.;
Two-Dimensional Analytical Calculation of Magnetic Field and Electromagnetic Torque for Surface-Inset Permanent-Magnet Motors
2012 / IEEE
By: Rezzoug, A.; Mezani, S.; Lubin, T.;
A New Methodology for Early Stage Magnetic Modeling and Simulation of Complex Electronic Systems
2012 / IEEE
By: Marechal, Y.; Guedon, S.; Martins, O.;
A Convenient Mesh Rotation Method of Finite Element Analysis Using Sub-Matrix Transformation Approach
2012 / IEEE
By: Fu, W.N.; Ho, S.L.; Shuangxia Niu; Jianguo Zhu;
Importance of Iron-Loss Modeling in Simulation of Wound-Field Synchronous Machines
2012 / IEEE
By: Rasilo, P.; Arkkio, A.; Belahcen, A.;
Analytical Approach for Air-Gap Modeling of Field-Excited Flux-Switching Machine: No-Load Operation
2012 / IEEE
By: Hoang, E.; Gaussens, B.; Gabsi, M.; Lecrivain, M.; Saint-Michel, J.; de la Barriere, O.;
Analysis and Design of Passive Magnetic Bearing and Damping System for High-Speed Compressor
2012 / IEEE
By: Kun Wang; Jinji Sun; Yun Le; Jiancheng Fang;
Review of Design Solutions for Internal Permanent-Magnet Machines Cogging Torque Reduction
2012 / IEEE
By: Davoli, M.; Bellini, A.; Lorenzani, E.; Immovilli, F.; Bianchini, C.;
Coupled Three Dimensional Numerical Calculation of Forces and Stresses on the End Windings of Large Turbo Generators via Integral Formulation
2012 / IEEE
By: Romano, A.; Martone, R.; Marignetti, F.; Formisano, A.; Ferraioli, F.; Rubinacci, G.; Calvano, F.; Albanese, R.; Ventre, S.; Dal Mut, G.; Tamburrino, A.;
Biorthogonal Shape Functions for Nonconforming Sliding Interfaces in 3-D Electrical Machine FE Models With Motion
2012 / IEEE
By: Hameyer, K.; Henrotte, F.; Lange, E.;
A Position Detection Strategy for Sensorless Surface Mounted Permanent Magnet Motors at Low Speed Using Transient Finite-Element Analysis
2012 / IEEE
By: Jianguo Zhu; Fu, W.N.; Ho, S.L.; Shuangxia Niu; Zhao Wang;
A New Topology of Low Speed Doubly Salient Brushless DC Generator for Wind Power Generation
2012 / IEEE
By: Yangyang Tao; Yangguang Yan; Zhuoran Zhang;
Electrical Motor Drivelines in Commercial All-Electric Vehicles: A Review
2012 / IEEE
By: Leijon, M.; Waters, R.; Ferhatovic, S.; Eriksson, S.; Ekerg�, B.; Bernhoff, H.; de Santiago, J.;
Eddy Current Reduction in High-Speed Machines and Eddy Current Loss Analysis With Multislice Time-Stepping Finite-Element Method
2012 / IEEE
By: Ho, S.L.; Shuangxia Niu; Jianguo Zhu; Fu, W.N.;
Influence of Soft Magnetic Material in a Permanent Magnet Synchronous Machine With a Commercial Induction Machine Stator
2012 / IEEE
By: Van den Bossche, A.; Sergeant, P.; Hofman, I.;
Alternative Rotor Designs for High Performance Brushless Permanent Magnet Machines for Hybrid Electric Vehicles
2012 / IEEE
By: Knight, A.M.; Hsieh, M.; Dorrell, D.G.;
Mesh Decomposition for Efficient Parallel Computing of Electrical Machines by Means of FEM Accounting for Motion
2012 / IEEE
By: Lange, E.; Bohmer, S.; Hameyer, K.; Bischof, C.; Cramer, T.; Hafner, M.;
Manufacturing Tolerances: Estimation and Prediction of Cogging Torque Influenced by Magnetization Faults
2012 / IEEE
By: van der Giet, M.; Coenen, I.; Hameyer, K.;
3-D Finite Element Analysis of Additional Eddy Current Losses in Induction Motors
2012 / IEEE
By: Biro, O.; Stermecki, A.; Ingruber, R.; Ofner, G.; Rainer, S.; Bakhsh, I.;
Parallel Time-Periodic Finite-Element Method for Steady-State Analysis of Rotating Machines
2012 / IEEE
By: Wakao, S.; Fujita, M.; Tokumasu, T.; Nakashima, H.; Fujiwara, K.; Takahashi, Y.; Iwashita, T.; Ishihara, Y.;
Numerical Prediction of Electromagnetic Vibration and Noise of Permanent-Magnet Direct Current Commutator Motors With Rotor Eccentricities and Glue Effects
2012 / IEEE
By: Guhuan He; Dayue Chen; Qin, R.; Zhenyu Huang;
Modification in Rotor Pole Geometry of Mutually Coupled Switched Reluctance Machine for Torque Ripple Mitigating
2012 / IEEE
By: Gabsi, M.; Lecrivain, M.; Hoang, E.; Hlioui, S.; Ojeda, J.; Guangjin Li;
Analytical Modeling of the Open-Circuit Magnetic Field in Axial Flux Permanent-Magnet Machines With Semi-Closed Slots
2012 / IEEE
By: Tiegna, H.; Barakat, G.; Amara, Y.; Bellara, A.;
Analytical Armature Reaction Field Distribution of Slotless Brushless Machines With Inset Permanent Magnets
2012 / IEEE
By: Rahideh, A.; Korakianitis, T.;
Controlling Rotor Vibrations of a Two-Pole Induction Machine With Unipolar Actuator
2012 / IEEE
By: Arkkio, A.; Jokela, T.; Sinervo, A.;
Influence of Copper Plating on Electromagnetic and Temperature Fields in a High-Speed Permanent-Magnet Generator
2012 / IEEE
By: Yi Ran; Zhang Xiaochen; Qiu Hongbo; Li Weili;
Homopolar 2-Pole Radial Permanent-Magnet Biased Magnetic Bearing With Low Rotating Loss
2012 / IEEE
By: Wang Xi; Fang Jiancheng; Fan Yahong; Tang Enqiong; Wei Tong;
Configuration Impacts on Eccentricity Fault Detection in Permanent Magnet Synchronous Motors
2012 / IEEE
By: Faiz, J.; Ebrahimi, B.M.;
Magnetic Field in a Transverse- and Axial-Flux Permanent Magnet Synchronous Generator From 3-D FEA
2012 / IEEE
By: Lai, L.L.; Weimin Wang; Chan, T.F.;
Reduction on Cogging Torque in Flux-Switching Permanent Magnet Machine by Teeth Notching Schemes
2012 / IEEE
By: Daohan Wang; Sang-Yong Jung; Xiuhe Wang;
Optimum Shape Design Solution of Flux Switching Motor Using Response Surface Methodology and New Type Winding
2012 / IEEE
By: Jung Ho Lee;
Using Improved Domain Decomposition Method and Radial Basis Functions to Determine Electromagnetic Fields Near Material Interfaces
2012 / IEEE
By: Lavers, J.D.; Jianguo Zhu; Youguang Guo; Shao, K.R.; Guangyuan Yang; Gang Lei; Xiaoming Chen;

Next Page
Return To Top