Your Search Results

Use materials about this topic in your textbook!

AcademicPub holds over eight million pieces of educational content - such as case studies and journal articles - for you to mix-and-match your way.

Experience the freedom of customizing your course pack with AcademicPub!
Not an educator but still interested in using this content? No problem! Visit our provider's page to contact the publisher and get permission directly.

Topic: Finite Element Analysis

Results

Device advantages of DI-LDD/LDD MOSFET over DD MOSFET
1985 / IEEE
By: Hanafi, H.I.;
Fat-trees: Universal networks for hardware-efficient supercomputing
1985 / IEEE
By: Leiserson, C.E.;
Frequency- and Temperature-Dependent Modeling of Coaxial Through-Silicon Vias for 3-D ICs
2011 / IEEE
By: Wen-Sheng Zhao; Xiao-Long Xu; Xiao-Peng Wang; Wen-Yan Yin;
Piezoresistive Strain Sensors and Multiplexed Arrays Using Assemblies of Single-Crystalline Silicon Nanoribbons on Plastic Substrates
2011 / IEEE
By: Ameen, A.; Hoon-Sik Kim; Sang Min Won; Rogers, J.A.; Nanshu Lu; Duenas, T.; Del Solar, C.; Dae-Gon Kim;
Enhanced Acoustic Emission Detection Induced by Electromagnetic Stimulation With External Magnetic Field
2011 / IEEE
By: Liang Jin; Qingxin Yang; Suzhen Liu; Chuang Zhang; Guizhi Xu; Weili Yan; Weinong Fu;
Design and Optimization of Soft Magnetic Composite Machines With Finite Element Methods
2011 / IEEE
By: Cros, J.; Viarouge, P.; Kakhki, M.T.;
Design and Analysis of a Novel Axial-Flux Electric Machine
2011 / IEEE
By: Ho, S.L.; Fu, W.N.; Shuangxia Niu;
Analyses of the temperature field of traveling-wave rotary ultrasonic motors
2011 / IEEE
By: Xiaolong Lu; Chunsheng Zhao; Junhui Hu;
Predicting Target Displacements Using Ultrasound Elastography and Finite Element Modeling
2011 / IEEE
By: Hansen, H.H.G.; op den Buijs, J.; Misra, S.; de Korte, C.L.; Lopata, R.G.P.;
Modeling Thermal Fatigue in CPV Cell Assemblies
2011 / IEEE
By: Kurtz, S.; Silverman, T.; Bosco, N.;
Development of a Novel Transverse Flux Wheel Motor
2011 / IEEE
By: Yu-Sheng Hsu; Mi-Ching Tsai;
Enhancing Impedance Imaging Through Multimodal Tomography
2011 / IEEE
By: Mamatjan, Y.; Gursoy, D.; Scharfetter, H.; Adler, A.;
Subassembly Magnetization Strategies for a Transverse Flux Motor Equipped With NdFeB Magnet
2011 / IEEE
By: Yu-Sheng Hsu; Min-Fu Hsieh; Mi-Ching Tsai;
Using Single-Wall Carbon Nanotubes and Raman Spectroscopy to Measure Local Stresses in First-Level Flip-Chip Organic Packages
2011 / IEEE
By: Nnebe, I.; Feger, C.; Soojae Park;
Decoupling Capacitor Placement in Power Delivery Networks Using MFEM
2011 / IEEE
By: Jae Young Choi; Swaminathan, M.;
A Novel Marker Design for Magnetic Marker Monitoring in the Human Gastrointestinal Tract
2011 / IEEE
By: Haueisen, J.; Baumgarten, D.; Biller, S.;
Influence of Bosch Etch Process on Electrical Isolation of TSV Structures
2011 / IEEE
By: Liu Youhe; Da Yong Lee; Ranganathan, N.; Pey, K.L.; Prasad, K.; Guo-Qiang Lo;
In-Situ Sensor-Matrix to Determine Package-Induced Stresses
2011 / IEEE
By: Glavanovics, M.; Aichinger, T.; Djelassi, C.; Kaltenbacher, M.;
Sensitivity Analysis of Microwave Circuits Using Parameterized Model Order Reduction Techniques
2011 / IEEE
By: Ahmadloo, M.; Dounavis, A.;
Analysis of Transient Overvoltage in 220 kV Saturated Core HTS FCL
2011 / IEEE
By: Hongli Xiao; Jie Qiu; Shuhong Wang; Qiuhui Zhang; Weizhi Gong; Ying Xin; Jian Guo Zhu; Youguang Guo;
Modeling of Analysis ICP Torch at Atmospheric Pressure With Applied Voltage
2011 / IEEE
By: Ikhlef, N.; Leroy, O.; Mekideche, M.R.;
Analytical Treatment of Eddy-Current Induction in a Conducting Half-Space With a Cylindrical Hole Parallel to the Surface
2011 / IEEE
By: Skarlatos, A.; Theodoulidis, T.;
A Fully Analytical Model for the Series Impedance of Through-Silicon Vias With Consideration of Substrate Effects and Coupling With Horizontal Interconnects
2011 / IEEE
By: Kourkoulos, V.; Chuan Xu; Banerjee, K.; Suaya, R.;
Numerical and Experimental Investigation of Grounding Electrode Impulse-Current Dispersal Regularity Considering the Transient Ionization Phenomenon
2011 / IEEE
By: Wenxia Sima; Qing Yang; Tao Yuan; Jingli Li; Zahn, M.; Caixin Sun;
Support Vector Machine Approach for Calculating the AC Resistance of Air-Core Reactor
2011 / IEEE
By: Jianlong Zou; Yanzhen Zhao; Xikui Ma; Feng Chen;
Ultrawide Frequency Range Crosstalk Into Standard and Trap-Rich High Resistivity Silicon Substrates
2011 / IEEE
By: Roda Neve, C.; Ben Ali, K.; Raskin, J.-P.; Gharsallah, A.;
Finite Volume-Based Approach for the Hybrid Ion-Flow Field of UHVAC and UHVDC Transmission Lines in Parallel
2011 / IEEE
By: Jinliang He; Han Yin; Rong Zeng; Bo Zhang;
GPU-Based Interactive Cut-Surface Extraction From High-Order Finite Element Fields
2011 / IEEE
By: Kirby, R.M.; Haimes, R.; Nelson, B.;
Development and Validation of Model for 95%-Efficiency 220-W Wireless Power Transfer Over a 30-cm Air Gap
2011 / IEEE
By: Seung-Hwan Lee; Lorenz, R.D.;
Optimization Design of a DC Commutator Motor With an Integrated Planetary Gear Train
2011 / IEEE
By: Hong-Sen Yan; Guan-Chen Chen; Yi-Chang Wu;
Torque Analysis of a Novel Non-Contact Permanent Variable Transmission
2011 / IEEE
By: Jing-Wei Xing; Yong Li; Zhi-Jun Yin; Yong-Ping Lu;
Quantitative Analysis of a Wireless Power Transfer Cell With Planar Spiral Structures
2011 / IEEE
By: Ho, S.L.; Xiu Zhang; Fu, W.N.;
New Axial Laminated-Structure Flux-Switching Permanent Magnet Machine With 6/7 Poles
2011 / IEEE
By: Wei Xu; Gang Lei; Youguang Guo; Yongchang Zhang; Jianguo Zhu;
Longitudinal and Transversal End-Effects Analysis of Linear Switched Reluctance Motor
2011 / IEEE
By: Zhu Zhang; Lin, J.K.; Xue, X.D.; Cheng, K.W.E.; Cheung, N.C.;
Analytical Design Study of a Novel Witricity Charger With Lateral and Angular Misalignments for Efficient Wireless Energy Transmission
2011 / IEEE
By: Mingui Sun; Fu, W.N.; Ho, S.L.; Junhua Wang;
A Method for Calculating Eddy Current Loss Distribution Based on Reluctance Network Analysis
2011 / IEEE
By: Yoshida, Y.; Ichinokura, O.; Nakamura, K.;
Wide Range Orthogonal Fluxgate Sensor Fabricated With Cylinder-Shaped Ferrite Core
2011 / IEEE
By: Young-Hak Kim; Byungwoo Yoon; Yongmin Kim; Kwang-Ho Shin; Cang-Seob Yang;
Design and FEM Analysis of a New Distributed Vernier Traveling Wave Induction Heater for Heating Moving Thin Strips
2011 / IEEE
By: Xiaoguang Yang; Ho, S.L.; Youhua Wang; Junhua Wang; Guizhi Xu; Fu, W.N.;
Analysis of a Magnetic Screw for High Force Density Linear Electromagnetic Actuators
2011 / IEEE
By: Jiabin Wang; Weiya Wang; Atallah, K.;
Reduction of Cogging Force in a Linear Flux-Switching Permanent-Magnet Brushless AC Machine for Direct-Drive Applications
2011 / IEEE
By: Chongxue Jiang; Minqiang Hu; Haitao Yu; Shigui Zhou; Li Hao;
Fault-Tolerant Performance of a Novel Flux-Switching Permanent Magnet Linear Machine Based on Harmonic Current Injection
2011 / IEEE
By: Li Hao; Shigui Zhou; Minqiang Hu; Haitao Yu; Lei Huang;
A Novel Approach to the Analysis of the Axial-Flux Permanent-Magnet Generator With Coreless Stator Supplying a Rectifier Load
2011 / IEEE
By: Ding, K.; Cheng, K.W.E.; Weimin Wang; Meng, L.C.;
Structure Comparison of High-Frequency Planar Power Integrated Magnetic Circuits
2011 / IEEE
By: Stegen, S.; Junwei Lu;
Modeling Neck and Brain Injuries in Infants
2011 / IEEE
By: Ponce, D.; Ponce, E.;
Modeling of Salient-Pole Synchronous Machines Assisted by Permanent Magnets
2011 / IEEE
By: Shirai, K.; Fukami, T.; Shima, K.; Tamiya, S.; Yamazaki, K.;
Thin-Shell Formulation Applied to Superconducting Shields for Magnetic Field Mitigation
2011 / IEEE
By: Chiampi, M.; Zilberti, L.; Manzin, A.; Gozzelino, L.;
Analytical Prediction of Optimal Split Ratio for Fractional-Slot External Rotor PM Brushless Machines
2011 / IEEE
By: Zhu, Z.Q.; Yang Shen;
Application of the Fixed Point Method for Solution in Time Stepping Finite Element Analysis Using the Inverse Vector Jiles-Atherton Model
2011 / IEEE
By: McMahon, R.A.; Mathekga, M.E.; Knight, A.M.;
Design and Analysis of a New Flux Memory Doubly Salient Motor Capable of Online Flux Control
2011 / IEEE
By: Wenlong Li; Zheng Wang; Ming Cheng; Dajian Chen; Li Quan; Xiaoyong Zhu;
Design Reconsiderations of High Speed Permanent Magnet Hybrid Excitation Motor for Main Spindle Drive in Machine Tools Based on Experimental Results of Prototype Machine
2011 / IEEE
By: Sridharbabu, M.; Matsui, N.; Kosaka, T.;
Local Magnetic Shielding of MRI Devices by Superconductive Materials
2011 / IEEE
By: Zucca, M.; Zilberti, L.; Gozzelino, L.; Chiampi, M.;
Modeling Amorphous Ribbons in Energy Harvesting Applications
2011 / IEEE
By: Fiorillo, F.; Beatrice, C.; Bottauscio, O.; Zucca, M.;
A Novel Axial Field Flux-Switching Permanent Magnet Wind Power Generator
2011 / IEEE
By: Mingyao Lin; Zhu, Z.Q.; Xuming Zhao; Xin Li; Li Hao;
A New Fault-Tolerant Permanent-Magnet Machine for Electric Vehicle Applications
2011 / IEEE
By: Wensheng Gong; Guohai Liu; Qian Chen; Wenxiang Zhao;
Thermal Impacts of Electromagnetic Proximity Effects in Induction Cooking System With Distributed Planar Multicoils
2011 / IEEE
By: Meng, L.C.; Wang, W.M.; Cheng, K.W.E.;
Modeling of Set and Reset Operations of Phase-Change Memory Cells
2011 / IEEE
By: Faraclas, A.; Silva, H.; Gokirmak, A.; Williams, N.;
Non-Newtonian Flow Formulation of the Underfill Process in Flip-Chip Packaging
2011 / IEEE
By: Wen-Bin Young;
Time-Domain Field and Scattering Parameter Computation in Waveguide Structures by GPU-Accelerated Discontinuous-Galerkin Method
2011 / IEEE
By: Glock, H.; Potratz, C.; van Rienen, U.;
Reducing Transmission Losses in Hollow THz Waveguides
2011 / IEEE
By: Mitrofanov, O.; Harrington, J.A.; Mavrogordatos, T.K.; Fernandez, F.A.; James, R.;
Finite Element Model of Electrical Machines Coupled to the Grid Simulation Software
2011 / IEEE
By: Mai Tu Xuan; Rosselet, G.; Simond, J.-J.;
Design aspects of focal beams from high-intensity arrays
2011 / IEEE
By: Kruse, D.E.; Stephens, D.N.; Ferrara, K.W.; Shengping Qin;
Interturn Stator Faults Analysis of a 200-MVA Hydrogenerator During Transient Operation Using FEM
2011 / IEEE
By: Safacas, A.N.; Dallas, S.E.; Kappatou, J.C.;
A Rigorous Solution to the Low-Frequency Breakdown in Full-Wave Finite-Element-Based Analysis of General Problems Involving Inhomogeneous Lossless/Lossy Dielectrics and Nonideal Conductors
2011 / IEEE
By: Dan Jiao; Jianfang Zhu;
Characteristics of Near-Surface-Core Optical Fibers
2011 / IEEE
By: Libo Yuan; Chunying Guan; Qiang Dai; Fengjun Tian;
Spatially Flat In-Phase Supermode in Multicore Hybrid Photonic Crystal Fiber
2011 / IEEE
By: Ching-Yue Wang; Lu Chai; Yan-Feng Li; Ming-Lie Hu; Xiao-Hui Fang;
A Moving Mesh Embedded Algorithm in Finite Element Method for Optimal Design of Electromagnetic Devices
2011 / IEEE
By: Fu, W.N.; Ningning Chen; Ho, S.L.;
A Novel Flux-Controllable Vernier Permanent-Magnet Machine
2011 / IEEE
By: Chau, K.T.; Jin Zhong; Chunhua Liu;
Analysis and Design of Double-Sided Air Core Linear Servo Motor With Trapezoidal Permanent Magnets
2011 / IEEE
By: Xiao Liu; Yunyue Ye; Kaiyuan Lu; Minghu Yu; Zilong Yang; Yuqiu Zhang;
Research of a Giant Magnetostrictive Valve With Internal Cooling Structure
2011 / IEEE
By: Yan Baiping; Zhang Chengming; Li Liyi; Li Xiaopeng;
Trying to Interpret Modern Art as a Finite-Element Practitioner
2011 / IEEE
By: Kuzuoglu, M.; Yilmaz, A.E.;
An Open-Source Software Tool for Benchmarking Numerical Solutions to Antenna Problems
2011 / IEEE
By: Capoglu, I.R.;
Rotor Eddy Current Loss Calculation and Thermal Analysis of Permanent Magnet Motor and Generator
2011 / IEEE
By: Nannan Zhao; Weiguo Liu; Zhu, Z.Q.;
Stator-Flux-Oriented Fault-Tolerant Control of Flux-Switching Permanent-Magnet Motors
2011 / IEEE
By: Chau, K.T.; Ming Cheng; Wenxiang Zhao; Wenlong Li; Jinghua Ji; Hongyun Jia; Wei Hua;
Investigation of a Novel Five-Phase Modular Permanent-Magnet In-Wheel Motor
2011 / IEEE
By: Lipo, T.A.; Chengde Tong; Jing Zhao; Yi Sui; Ping Zheng; Aimeng Wang;
Simulation of the Saturation and Air-Gap Effects in a POT Ferrite Core With a 2-D Finite Element Model
2011 / IEEE
By: Pleite, J.; Salas, R.A.;
Analysis Method to A Halbach PM Ironless Linear Motor With Trapezoid Windings
2011 / IEEE
By: Xueliang Huang; Gan Zhou; Jianning Dong; Li Tan; Hao Jiang;
Deep-collapse operation of capacitive micromachined ultrasonic transducers
2011 / IEEE
By: Olcum, S.; Atalar, A.; Bozkurt, A.; Yamaner, F.Y.;
Characteristic Analysis of Permanent Magnet Synchronous Machines Under Different Construction Conditions of Rotor Magnetic Circuits by Using Electromagnetic Transfer Relations
2011 / IEEE
By: Yu-Seop Park; Min-Mo Koo; Seok-Myeong Jang; Sung-Ho Lee; Jang-Young Choi;
Equivalent circuit and optimum design of a multilayer laminated piezoelectric transformer
2011 / IEEE
By: Shuxiang Dong; Seung Ho Park; Vazquez Carazo, A.;
Practical optimum design based on magnetic balance and copper loss minimization for a single-phase line start PM motor
2011 / IEEE
By: Byung-il Kwon; Byung-taek Kim; Soo-whang Baek;
Harmonic Analysis and Comparison of Permanent Magnet Vernier and Magnetic-Geared Machines
2011 / IEEE
By: Jiangui Li; Wenlong Li; Chau, K.T.;
Electromagnetic Performance Analysis of Hybrid-Excited Flux-Switching Machines by a Nonlinear Magnetic Network Model
2011 / IEEE
By: Gan Zhang; Wei Hua; Jianning Dong; Ming Cheng;
Radially composite piezoelectric ceramic tubular transducer in radial vibration
2011 / IEEE
By: Wang Shuaijun; Lin Shuyu;
Study and comparison of different EMAT configurations for SH wave inspection
2011 / IEEE
By: Ribichini, R.; Cawley, P.; Nagy, P.B.; Cegla, F.;
Analysis of the Oversaturated Effect in Hybrid Excited Flux-Switching Machines
2011 / IEEE
By: Gan Zhang; Jianning Dong; Wei Hua; Ming Cheng;
Miniaturized acceleration sensors with in- plane polarized piezoelectric thin films produced by micromachining
2011 / IEEE
By: Gaunekar, A.; Chin Yaw Tan; Yifan Chen; Oh, S.R.; Ng, P.H.Y.; Kui Yao; Shanmugavel, S.; Trung Dung Luong; Li, M.H.L.;
FEA modeling of CMUT with membrane stand-off structures to enable selectable frequency-mode operation
2011 / IEEE
By: Eames, M.D.C.; Hossack, J.A.; Kilroy, J.P.; Reck, T.J.;
Design and Analysis of Linear Stator Permanent Magnet Vernier Machines
2011 / IEEE
By: Chau, K.T.; Yi Du; Zheng Wang; Wei Hua; Yubin Wang; Ying Fan; Ming Cheng;
Design and Comparison of Vernier Permanent Magnet Machines
2011 / IEEE
By: Ho, S.L.; Fu, W.N.; Shuangxia Niu;
Eddy-Current Loss Prediction in the Rotor Magnets of a Permanent Magnet Synchronous Generator With Modular Winding Feeding a Rectifier Load
2011 / IEEE
By: Long Jin; Jianning Dong; Yunkai Huang; Youguang Guo; Jianguo Zhu;
Research on Power Frequency Electromagnetic Environment of UHVAC Wires and Related Electrostatic Induction Effect
2011 / IEEE
By: Jianning Dong; Jie Shen; Gan Zhou; Li Huang; Xueliang Huang;
Phononic plate waves
2011 / IEEE
By: Jia-Hong Sun; Jin-Chen Hsu; Tsung-Tsong Wu;
Characteristics of Ferromagnetic Materials Due to Uneven Magnetic Saturation
2011 / IEEE
By: Dong-Seok Ryu; Ki-Chan Kim; Min-Gyu Kim;
Force Ripple and Magnetic Unbalance Reduction Design for Doubly Salient Permanent Magnet Linear Synchronous Motor
2011 / IEEE
By: Shi-Uk Chung; Dae-Hyun Koo; Ji-Young Lee; Do-Kwan Hong; Byung-Chul Woo; Ji-Won Kim;
ZnO-Based FBAR resonators with carbon nanotube electrodes
2011 / IEEE
By: Zhao, X.; Luo, J.K.; Milne, W.I.; Ashley, G.M.; Lu, J.R.; Flewitt, A.J.; Al-Naimi, F.; Garcia-Gancedo, L.;
Evaluation of Magnetic Force Distribution and Torque Due to Smooth Interaction Body Force Density in Permanent-Magnet Materials
2011 / IEEE
By: Geun-Young Jeong; Se-Hee Lee; Heung-Geun Kim; Hong-Joon Kim; Hong-Soon Choi;
Longitudinal wave scattering from rough crack-like defects
2011 / IEEE
By: Wilcox, P.D.; Drinkwater, B.W.; Jie Zhang;
Eddy-Current Simulations Using an Independent Impedance Method in Anisotropic Biological Tissues
2011 / IEEE
By: Crevecoeur, G.; De Geeter, N.; Dupre, L.;
High Frequency Planar Transformer (HFPT) for Universal Contact-Less Battery Charging Platform
2011 / IEEE
By: Jun-Wei Lu; Panchal, C.;
Optimum Shape Design of Single-Sided Linear Induction Motors Using Response Surface Methodology and Finite-Element Method
2011 / IEEE
By: Jung-Pyo Hong; Kyu-Seob Kim; Byeong-Hwa Lee; Jung-Ho Lee;

Next Page
Return To Top