Your Search Results

Use materials about this topic in your textbook!

AcademicPub holds over eight million pieces of educational content - such as case studies and journal articles - for you to mix-and-match your way.

Experience the freedom of customizing your course pack with AcademicPub!

Not an educator but still interested in using this content? No problem! Visit our provider's page to contact the publisher and get permission directly.

Topic: Hardness

Results

Mechanical and Tribological Properties of LDX2101 Duplex Stainless Steel Submitted to Glow Discharge Ion Nitriding

2011 / IEEE
By: Lepienski, C.M.; Serbena, F.C.; Foerster, C.E.; Assmann, A.; Chinelatto, A.L.;

Hardness of Low Delay Network Scheduling

2011 / IEEE
By: Tsitsiklis, J.N.; Tse, D.N.C.; Shah, D.;

A Bayesian Approach for Total Ionizing Dose Hardness Assurance

2011 / IEEE
By: Ladbury, R.; Triggs, B.;

Noise Reduction of a Three-Phase Reactor by Optimization of Gaps Between Cores Considering Electromagnetism and Magnetostriction

2011 / IEEE
By: Fukuchi, S.; Ishihara, Y.; Fujiwara, K.; Muramatsu, K.; Nagata, M.; Yanhui Gao;

Investigation of Affecting Factors on the Hardness of Fluorine-Containing Amorphous Carbon Film Coated by Pulsed-Plasma Ablation

2012 / IEEE
By: Yamada, K.; Kousaka, H.; Koizumi, H.; Hamajima, E.; Kawara, S.; Arakawa, Y.; Umehara, N.;

Production of Low Electron Temperature Plasma and Coating of Carbon-Related Water-Repellent Films on Plastic Plate

2012 / IEEE
By: Kihara, K.; Ohtsu, Y.;

Numerical and Experimental Study of Residual Stress of Multilayer Diamond-Like Carbon Films Prepared by Filtered Cathodic Vacuum Arc Deposition

2012 / IEEE
By: Yong-xiang Leng; Sun, H.; Zheng, Y.J.; Xu, Z.Y.; Huang, N.;

Transient Radiation Responses of Optical Fibers: Influence of MCVD Process Parameters

2012 / IEEE
By: Marcandella, C.; Girard, S.; Raine, M.; Gaillardin, M.; Paillet, P.; Richard, N.; Ouerdane, Y.; Boukenter, A.; Alessi, A.;

A Novel Plasma Technique for Surface Treatment: The Plasma Expander

2012 / IEEE
By: Machida, M.; Rangel, E.C.; Cruz, N.C.; Durrant, S.F.;

Study on the Effect of Wafer Back Grinding Process on Nanomechanical Behavior of Multilayered Low-k Stack

2012 / IEEE
By: Kripesh, V.; Premchandran, C.S.; Tai Chong Chai; Xiaowu Zhang; Seung Wook Yoon; Kumar, A.; Lu Shen; Sekhar, V.N.; Lau, J.H.;

On New Approaches of Assessing Network Vulnerability: Hardness and Approximation

2012 / IEEE
By: Ying Xuan; Dinh, T.N.; Znati, T.; Pardalos, P.M.; Thai, M.T.;

Study on pre-fire phenomenon for multiplex high-energy spark gap switches with graphite electrodes

2012 / IEEE
By: Lin Fuchang; Cai Li; Qi Xiangdong; Lee Li;

Preperation and characterization of carbon nitride thin film by ionbeam evaporation

2000 / IEEE
By: Shioiri, K.; Suzuki, T.; Yatsui, K.; Jiang, W.;

Hardening in MgO�3.0Al2O3 by neutron irradiation

2000 / IEEE
By: Yatsui, K.; Suematsu, H.; Yano, T.;

Characteristics of CrN films prepared by pulsed laser deposition

2000 / IEEE
By: Jiang, W.; Suzuki, T.; Ueno, Y.; Hirai, M.; Yatsui, K.; Grigoriu, C.;

Effect of nano-sized particles on bond strength in accumulative roll bonding

2010 / IEEE / 978-1-4244-5261-3
By: Lihong Su; Tieu, A.K.; McNeice, T.; Cheng Lu;

Nanoindentation experiment and modeling for biomechanical behavior of red blood cell

2011 / IEEE / 978-1-4244-8115-6
By: Luodan Su; Zhiyuan Liu; Weiwei Li; Qingsheng Yang;

Effect of cold working on mechanical properties of a cobalt base superalloy

2011 / IEEE / 978-1-4244-9439-2
By: Dawei Cui;

Study of the cold-extruding tapping process of titanium alloy and the machine of compound vibration

2011 / IEEE / 978-1-4244-9439-2
By: Mingliang Yang; Yingxuan Liang;

Synthesis of polyurethane using soybean oil based polyol and characterization of their coating properties

2011 / IEEE / 978-1-4577-1280-7
By: Ramli, R.; Mohd, A.F.; Nagteni, M.M.;

Application and research of primer-free painting on automobile interior surface

2011 / IEEE / 978-1-4244-9439-2
By: Xiujuan Li; Xiukui Yuan; Fuquan Zhao; Qiang Liu; Fangwu Ma; Jianwei Jin; Xiaoyun Ren;

Automatic control method research on pendulum speed of roadheader's cutting arm

2011 / IEEE / 978-1-4244-9439-2
By: Rui Li; Juan Gao; Su yu Wang; Feng Gao; Miao Wu;

Studies on the UV curable paints of metal based on polyurethaneacrylate

2011 / IEEE / 978-1-4577-0536-6
By: Rong Zhong; Yunhua Gao; Yu Xie; Fan Xiong; Qiuhua Xu;

Analysis of microstructure and mechanical properties of graded nano-composite Si3N4-based ceramic cutting tool material

2011 / IEEE / 978-1-61284-088-8
By: Yuanyuan Liu; Jun Zhao; Xing Ai; Qiang Xue; Yonghui Zhou;

Carbon nanoatubes on aluminum matrix composites by friction stir processing

2011 / IEEE / 978-1-61284-088-8
By: Xing Li; Ke Liming; Xu Weiping;

Experimental study of surface roughness on abrasive belt grinding

2011 / IEEE / 978-1-61284-088-8
By: Hong Li;

A novel multilayer neural network model for heat treatment of electroless Ni-P coatings

2011 / IEEE / 978-1-4244-9637-2
By: Monir Vaghefi, S.Y.; Monir Vaghefi, S.M.;

Nanoindentation for measuring mechanical properties of Sn-Ag-Cu-RE BGA solders joints

2011 / IEEE / 978-1-4577-0399-7
By: Yang Liu; Meina Liu; Lifeng Wang; Fenglian Sun;

Nano-structure and nano-mechanical properties of human teeth

2011 / IEEE / 978-1-61284-777-1
By: Wang-Long Li; Chang-Fu Han; Shu-Fen Chuang; Jen-Fin Lin; Bo-Hsiung Wu; Chung-Jen Chung;

Molecular simulations of sliding process between Fe and DLC films on various boundary conditions

2011 / IEEE / 978-1-4244-9953-3
By: Huiqing Lan; Kato, T.; Yue Cui; Can Liu;

Determination of the total hardness in industrial cooling water using image identification

2011 / IEEE / 978-1-4244-8161-3
By: Xu Zhiming; Lv Baoqing; Qin Yuchun; Zhang Haiyan; Qin Yuhua;

Fabrication and characterization of SiC thin films

2011 / IEEE / 978-1-61284-777-1
By: Lei Liu; Hai-xia Zhang; Bai-xiang Zheng; Wei Tang;

Morphology and nanoindentation properties of intermetallic compounds in solder joints

2011 / IEEE / 978-1-4577-1769-7
By: Qin Fei; Zhong Weixu; Liu Chengyan; An Tong;

Nanoindentation characterization of Sn-Ag-Sb/Cu substrate IMC Layer subject to thermal aging

2011 / IEEE / 978-1-61284-846-4
By: Bais, B.; Shualdi, W.; Isnin, A.; Omar, G.; Ahmad, I.;

Effective methods for Brinell Hardness Measure based on vision

2011 / IEEE / 978-1-4244-9306-7
By: Jian Dong; Jie Jiang;

Curie temperature effects on resistance spot welding

2011 / IEEE / 978-1-4577-1389-7
By: Wei, P.S.; Wu, T.H.;

The free vibration of the three layered nonhomogeneous orthtropic plates

2011 / IEEE / 978-1-61284-832-7
By: Isayev, F.G.; Qaraisayev, S.N.;

Study on the environmental performance of additional vinyl LSR

2011 / IEEE / 978-1-4673-0149-7
By: Zhidong Xia; Ying Li; Hu Zhou; Yongping Lei;

Structure of mesoporous Al2O3 thin film obtained by surfactant templating

2011 / IEEE / 978-1-4577-1516-7
By: Tae-Jung Ha; Seungsu Baek; Hyung-Ho Park;

Elemental analysis of treated layers on stainless steel after low temperature hybrid thermochemical treatments

2011 / IEEE / 978-1-4577-1884-7
By: Ismail, M.C.; Hussain, P.; Triwiyanto, A.;

The effect of processing methods on some properties of rice husk-polypropylene composite: A preliminary report

2011 / IEEE / 978-1-4577-1884-7
By: Joshua, R.M.; Namesan, N.O.; Ugheoke, B.I.; Ufodi, R.N.;

Hybrid RSM-fuzzy modeling for hardness prediction of TiAlN coatings

2011 / IEEE / 978-1-4577-1676-8
By: Haron, H.; Hashim, S.Z.M.; Napiah, Z.A.F.M.; Rahman, M.N.A.; Muhamad, M.R.; Jaya, A.S.M.;

Design of PDC bit for lower layer in BinHai block Dagang oilfield

2011 / IEEE / 978-1-4577-1701-7
By: Wang Yuanxi; Wei Zhongliang; Chen Zhengyang;

Prediction of mechanical properties of silica hybrid nanocomposites

2011 / IEEE / 978-1-4673-0074-2
By: Pramila Devi, M.; Koona, R.; Suneel, D.; Dumpal, L.;

Microstructure and mechanical properties of Al-Si cast alloy grain refined with Ti-B-Sr-Sc-Mg

2011 / IEEE / 978-1-4673-0020-9
By: Arawi, A.Z.O.; Talari, M.K.; Ramli, R.;

Fabrication of novel shark collagen-pectin scaffolds for tissue engineering

2012 / IEEE / 978-1-4577-2190-8
By: Benjakul, S.; Sangsen, Y.; Oungbho, K.;

Study of thin film adhesion properties of multilayer flexible electronics composites

2012 / IEEE / 978-1-4673-1124-3
By: Li, C.C.; Liu, Z.H.; Pan, C.T.; Chang, S.J.; Huang, H.L.; Mao, S.W.; Shen, S.C.; Tseng, J.K.;

Surface modification and mechanical property studies of Ti6Al4V alloy using high power diode laser in nitrogen atmosphere

2011 / IEEE / 978-1-4673-0074-2
By: Polaki, S.R.; Jose, F.; Ramaseshan, R.; Sivakumar, M.; Karunakaramoorthy, B.; Senthilselvan, J.;

Applications of natural fiber composites for replacement of orthopaedic alloys

2011 / IEEE / 978-1-4673-0074-2
By: Marimuthu, K.; Chandramohan, D.;

Experimental investigation on mechanical behavior of friction welded AL7075

2012 / IEEE / 978-81-909042-2-3
By: Rajendran, M.; Mathi, K.;

Study on preparation of copper matrix composites reinforced by SiC and Graphite particles

2012 / IEEE / 978-1-4577-1415-3
By: Wang Jin; Xie Niansuo;

Artificial intelligence for pattern recognition in automated surface engineering

2012 / IEEE / 978-1-4673-0199-2
By: Javidi, G.; Adnani, F.; Garcia-Otero, S.; Sheybani, E.;

Effect of single step pretreatment on cobalt contents and surface roughness of tungsten carbide substrate prior to diamond coating

2012 / IEEE / 978-1-4673-0654-6
By: Shakir, N.A.A.; Ghazali, N.; Muhamad, W.Z.A.W.; Junoh, A.K.;

Improving the thermomechanical behavior of lead free solder joints by controlling the microstructure

2012 / IEEE / 978-1-4244-9532-0
By: Yin, L.; Chivukula, S.; Halaweh, M.; Tashtoush, T.; Alazzam, A.; Meilunas, M.; Wentlent, L.; Arfaei, B.; Joshi, S.; Borgesen, P.; Cotts, E.;

Experimental Study for "Quasi-uniform Wearability" Treatment of Cylinder Liner Inner Surface

2011 / IEEE / 978-1-4577-0755-1
By: Chen Ai Rong; Wang Shou Zhong; Liu Yu Ying;

Improved Hardness of Single-Crystal ${\rm Nd}^{3+}:{\rm YAG}$ to Ionizing Radiation via Co-Doping with ${\rm Cr}^{3+}$

2012 / IEEE
By: Fox, B.P.; Simmons-Potter, K.; Glebov, B.L.; Meister, D.C.;

Mechanical characteristics of thin dies/wafers in three-dimensional large-scale integrated systems

2013 / IEEE
By: Murugesan, M.; Tanaka, T; Kovanagi, M; Lee, K. W.; Bea, J. C.; Fukushima, T;

Effect of Ta addition on hardness and wear resist of Cu-Al-Ni shape memory alloy fabricated by powder metallurgy

2013 / IEEE
By: Takhakh, Ayad M.; Abid Ali, Abdul Rahim K.; Alfay, Raied Z.;

Mechanical properties of piezoelectric PVDF/MWCNT fibers prepared by flat/hollow cylindrical near-field electrospinning process

2013 / IEEE
By: Lin, L.W.; Pan, C.T.; Liu, Z.H.; Wang, P.S.; Huang, J.C.; Ke, C.A.; Li, H.W.;

Correlation between hardness and elastic moduli of the ultraincompressible transition metal diborides RuB2, OsB2, and ReB2

2008 / American Institute of Physics
By: Hsiu-Ying Chung; Michelle B. Weinberger; Jenn-Ming Yang; Sarah H. Tolbert; Richard B. Kaner;

Mechanical heterogeneity and mechanism of plasticity in metallic glasses

2009 / American Institute of Physics
By: J. G. Wang; D. Q. Zhao; M. X. Pan; C. H. Shek; W. H. Wang;

Accurate reconstruction of the thermal conductivity depth profile in case hardened steel

2010 / American Institute of Physics
By: Ricardo Celorrio; Estibaliz Apiñaniz; Arantza Mendioroz; Agustín Salazar; Andreas Mandelis;

Noncontact evaluation of surface-modified materials by a model-assisted hysteresis measurement technique

2010 / American Institute of Physics
By: C. C. H. Lo;

Uncertainty estimation in measurement of micromechanical properties using random-fuzzy variables

2006 / American Institute of Physics
By: Qiang Zhu; Zhuangde Jiang; Zexiang Zhao; Hairong Wang;

Formation of nanostructure and nano-hardness characterization on the meso-scale workpiece by a novel laser indirect shock forming method

2012 / American Institute of Physics
By: Y. Hu; H. X. Liu; X. Wang; Z. B. Shen; P. Li; C. X. Gu; Y. X. Gu; M. M. Lu; Q. Zhang;

Interrelationship «structure-hardness-fusibility» for oxide crystals

2014 / IEEE
By: Kidyarov, B.I.; Makukha, V.K.;

Nanoindentation of Si1−xGex thin films prepared by biased target ion beam deposition

2014 / IEEE
By: Faraone, Lorenzo; Liu, Yinong; Bumgarner, John; Silva, Dilusha; Martyniuk, Mariusz; Brookshire, Kirsten; Hou, Xiaowei; Ge, Ruijing; Krishnan, N. Radha;

Long-term stability of ICPCVD a-Si under prolonged heat treatment

2014 / IEEE
By: Dilusha Silva, K. K. M. B.; Martyniuk, Mariusz; Brookshire, Kirsten L.; Faraone, Lorenzo; Liu, Yinong;

The processing technology of the colored Ti-6Al-4V alloy surface by WEDM-HS and hardness analysis

2014 / IEEE
By: Xu, Jinkai; Yu, Zhanjiang; Yu, Huadong; Zhang, Linshuai; Xia, Kui;

Characterization of Bulk MgB2 Synthesized by Infiltration and Growth

2015 / IEEE
By: Dennis, A.R.; Hari Babu, N.; Bhagurkar, A.G.; Cardwell, D.A.; Durrell, J.H.;

Characterization and Reliability of Sintered Nanosilver Joints by a Rapid Current-Assisted Method for Power Electronics Packaging

2014 / IEEE
By: Chen, G.; Cao, Y.; Mei, Y.-H.; Chen, X.; Lu, G.-Q.; Li, X.;

The Study on Factors Influencing the Ice-Melting Performance of Transmission Line

2013 / IEEE
By: Lixing, Zhou; Bin, Fan; Zhe, Tian;

Comparing different mechanical models for the evaluation of mechanical behavior of reuse in PVC electrosurgical pencils through their hardness and Young's Modulus relation

2014 / IEEE
By: Montoya-Goez, Y.; Torres-Montoya, S.; Tapias, L.;

Application of acrylic-based nanocomposites in the consolidation of historical enamel layers

2014 / IEEE
By: Tomaszewska-Szewczyk, A.; Podgórski, A.; Piasecka, A.;

Large-scale preparation of ceria/bismuth metal-matrix nano-composites with a hardness comparable to steel

2007 / RSC Publishing
By: Thomas F. Albrecht; Robert N. Grass; Wendelin J. Stark; Frank Krumeich;

Further links between the maximum hardness principle and the hard/soft acid/base principle: insights from hard/soft exchange reactions

2007 / RSC Publishing
By: Paul W. Ayers; Pratim K. Chattaraj; Junia Melin;

N-Dependence problem of local hardness parameter

2008 / RSC Publishing
By: Soumen Saha; Ram Kinkar Roy;

Minimum electrophilicity principle: an analysis based upon the variation of both chemical potential and absolute hardness

2009 / RSC Publishing
By: Vanessa Labet; Christophe Morell; Henry Chermette; Andreacute Grand;

Photoinduced hardness change on TiO2 single crystal surfaces

2009 / RSC Publishing
By: Hiroshi Irie; Tatsuo Shibata; Kazuhito Hashimoto;

On the applicability of local softness and hardness

2010 / RSC Publishing
By: P. W. Ayers; F. De Proft; M. TorrentSucarrat; P. Geerlings;

Research on wear characteristics of AISI 1035 steel boronized at various parameters

2011 / Emerald Publishing
By: N. Kiratli; F. Findik;

Exact prescribed displacement field solutions in Mohr Coulomb elastoplasticity

1996 / Emerald Publishing
By: Khalid Moin; Pankaj;

Contact voltage drop and wear of self-lubricating Ag-Pd alloy base composite materials

1988 / IEEE
By: Yoshida, M.; Okada, K.;

Properties of the W-type hexaferrite PbZn/sub 2/Fe/sub 16/O/sub 27/

1988 / IEEE
By: Haberey, F.; Wiesemann, P.;

The development of new copper ball bonding-wire

1988 / IEEE
By: Yoshida, H.; Mori, S.; Uchiyama, N.;

Electroformed bumped tape, a practical interconnect method for high-lead count devices

1988 / IEEE
By: Samudrala, R.P.; Grabowski, M.A.; Dugan, W.P.;

Materials for sliding contacts in the twenty-first century

1988 / IEEE
By: Burton, R.A.;

Powder metallurgy fabrication of palladium contact alloys

1988 / IEEE
By: Bourguignon, L.L.; Lin, S.T.; Farooq, S.; German, R.M.; Agarwal, D.P.;

Elastomer shelf life: aged junk or jewels?

1989 / IEEE
By: Boyum, B.M.; Rhoads, J.E.;

Theoretical considerations for optimal positioning of peaking capacitor arms about a Marx generator parallel to a ground plane

1989 / IEEE
By: Baum, C.E.; Giri, D.V.;

Hardness vs. randomness

1988 / IEEE / 0-8186-0877-3
By: Wigderson, A.; Nisan, N.;

On the two modes of operation of monolithic Ag-C brushes

1989 / IEEE
By: Makel, D.D.; Kuhlmann-Wilsdorf, D.; Maribo, D.W.; Sondegaard, N.A.;

Improvement of hardness of MOS capacitors to electron-beam irradiation and hot-electron injection by ultradry oxidation of silicon

1989 / IEEE
By: Sugano, T.; Mukai, K.; Yoshida, I.; Nishioka, Y.; Ohji, Y.; Haruta, R.;

TSDC analysis of the poly(trans 1-octenylene)

1988 / IEEE
By: Jimenez, J.; Torres, A.; Fraile, J.; de Saja, J.A.;

Hardness vs. randomness-a survey

1989 / IEEE / 0-8186-1958-9
By: Nisan, N.; Wigderson, A.;

Improvement of hot-electron-induced degradation in MOS capacitors by repeated irradiation-then-anneal treatments

1990 / IEEE
By: Chen, J.-T.; Hwu, J.-G.;

The hardness of decoding linear codes with preprocessing

1990 / IEEE
By: Bruck, J.; Naor, M.;

Millimeter-wave backscatter characteristics of multilayered snow surfaces

1990 / IEEE
By: McIntosh, R.E.; Narayanan, R.M.;

Properties of CuTeSeFe contact material for vacuum interruptors

1990 / IEEE
By: Jimei Wang; Xiaotian Wang; Bingjun Ding;

Materials and processing parameters affecting the radiation tolerance of SIMOX devices

1989 / IEEE
By: Jastrzebski, L.L.; Ipri, A.C.; Policastro, S.; Peters, D.;

Next Page