Your Search Results

Use materials about this topic in your textbook!

AcademicPub holds over eight million pieces of educational content - such as case studies and journal articles - for you to mix-and-match your way.

Experience the freedom of customizing your course pack with AcademicPub!

Not an educator but still interested in using this content? No problem! Visit our provider's page to contact the publisher and get permission directly.

Topic: Cold Rolling

Results

Comparison of Magnetic Properties of Magnetic Materials at High Temperature

2011 / IEEE
By: Miyagi, D.; Morishita, M.; Takahashi, N.; Nakano, M.;

Data-Based Hybrid Tension Estimation and Fault Diagnosis of Cold Rolling Continuous Annealing Processes

2011 / IEEE
By: Si-Zhao Joe Qin; Hong Wang; Tianyou Chai; Qiang Liu;

Hysteresis Scaling Behavior in a Remanent Magnetization State

2012 / IEEE
By: Ishibashi, Y.; Takahashi, S.; Kobayashi, S.;

Study of the Simultaneous Effects of the Hot Band Grain Size and Cold Rolling Reduction on the Structure and Magnetic Properties of Nonoriented 3% Si Steel

2012 / IEEE
By: Cota, A.B.; de Dale, S.S.F.; da Cunha, M.A.; da C Paolinelli, S.;

Effect of Plastic Deformation on the Excess Loss of Electrical Steel

2012 / IEEE
By: de Campos, M.F.; Machado, R.; Landgraf, F.J.G.; Missell, F.P.; Gerhardt, G.J.L.; Silveira, J.R.F.; Rodrigues, D.L.;

Monitoring Roll Chock Temperature: A Wireless System for a Tandem Cold Mill

2012 / IEEE
By: Rendueles, J.L.; Baizan, P.; Diaz, A.; Lopera, J.M.; Ema, L.; Perez, J.M.;

Impacts of Heat Treatment on Properties and Microstructure of Cu16at%Ag Conductors

2012 / IEEE
By: Jun Lu; Goddard, R.; Toplosky, V.J.; Ke Han; Jingping Chen; Rongmei Niu;

Analysis of thread rolling die and its application on automatical screwmachine

2011 / IEEE / 978-1-4244-9439-2
By: Qianwei Zhang; Yanjun Xiao; Yuming Guan; Zhitao Zhang;

Application of improved ant colony algorithm in load distribution optimization of tandem cold rolling

2011 / IEEE / 978-1-4244-9439-2
By: Bo Mao; Yiqun Wang; Lizhi Liu; Wanlu Jiang;

Robust control of strip tension for tandem cold rolling mill

2011 / IEEE / 978-988-17255-9-2
By: Zhang Qingdong; Zhang Xiaofeng;

Cold rolling force prediction for copper strip based on applications of GA and BPNN

2011 / IEEE / 978-1-4244-9439-2
By: Wei Jian Cai; Xiao Qu; Xi Lin Liu;

Study on Roll Forming Process Parametric Simulation

2011 / IEEE / 978-1-4577-0856-5
By: Xia Chen; Qingming Chang;

A design of a SmartCrown work roll profile

2011 / IEEE / 978-1-61284-088-8
By: Run-quan Gao; Zi-ping Liu; Guang-hui Yang;

Mechanical behaviour of self-piercing riveted two-layer joints with different surface treatment

2011 / IEEE / 978-1-61284-722-1
By: Dang Xiangwen; Liu Ruijun;

PSO algorithm based PID parameters optimization of hydraulic screwdown system of cold strip mill

2011 / IEEE / 978-1-4244-8452-2
By: Dongning Chen; Chengyu Yao; Guofeng Zhang;

The temperature controlling system design of ARP during cold rolling based on fuzzy expert system

2011 / IEEE / 978-1-4577-0321-8
By: Pang Lijuan; Zhang Xuefeng; Deng Gang;

Advanced soft sensor technology to be used for cold rolling mills

2011 / IEEE / 978-1-4577-0018-7
By: Preglej, A.; Juricic, D.; Dedecius, K.; Ettler, P.;

Research advance on the flow of hydrogen in the inner bell of high performance hydrogen bell-type annealers

2011 / IEEE / 978-1-4244-8165-1
By: Wenwen Huang; Qi Wang; Suyi Huang; Shiping Jin; Wuqi Wen; Dajun Zhu; Shunli Fang; Shibin Li; Yilin Zhou;

Coiling eccentricity compensation control system based on BP Neural Network Algorithm

2011 / IEEE / 978-1-4577-0321-8
By: Jianlong Guan; Quan Yang; Anrui He; Jian Shao; Wenquan Sun;

The design and application of automatic control system copper cold rolling mill based on PLC

2011 / IEEE / 978-1-4244-8165-1
By: Jiaoyue Liu; Juqing Yang;

Harmonic analysis and filter bank design for a new rectifier for a Cold Roll Mill

2011 / IEEE / 978-1-4244-9500-9
By: Dionise, T.J.; Allenbaugh, M.; Natali, T.J.;

Predicting mechanical properties of cold- rolled low carbon steel based on magnetic parameter measurement using ANFIS model

2011 / IEEE / 978-1-4244-9500-9
By: Eftekhari, M.; Kamranian Marnani, A.; Asefi, D.; Monajati, H.; Ghadamyari, M.A.; Moallem, M.;

Taper pole forming machine by PLC control

2011 / IEEE / 978-1-4577-1549-5
By: Nakanishi, K.; binti Mohd Saffe, S.N.; Ona, H.; Aso, H.;

Reduction of rejections in cold rolled strip welding by intelligent analysis of image and process data

2011 / IEEE / 978-1-4577-1676-8
By: Rodriguez, F.; Villanueva, J.; Fernandez, L.; Mesa, J.M.;

Study on Friction Coefficient Mechanism Model of Tandem Cold Mill in Unstable Condition

2011 / IEEE / 978-1-4577-2008-6
By: Hao Peifeng;

Design of a novel fuzzy adaptive PI controller for monitor hydraulic AGC system of cold rolling mill

2011 / IEEE / 978-1-4577-1461-0
By: Afshar, A.; Khosravi, S.; Barazandeh, F.;

The Temperature Controlling System Design of ARP During Cold Rolling Based on Expert System

2012 / IEEE / 978-1-4673-0470-2
By: Pang Lijuan; Zhang Xuefeng; Li Huirong; Deng Gang;

Control strategy for the flexible roll forming machine with the structure of double rack and single gear

2011 / IEEE / 978-1-4577-1701-7
By: Qian Bo; Li Qiang; Sun Wenting;

Design and implementation of MES framework in Pangang Group

2012 / IEEE / 978-1-4577-1415-3
By: Jianbing Wu; Jiguang Liu;

Multi-objective optimization of rolling schedules for tandem cold rolling based on adaptive weight differential evolution algorithm

2012 / IEEE / 978-1-4673-2237-9
By: Qun Gai; Yu Wang; Yong Li;

Multiple crane scheduling in batch annealing process with no-delay constraints for machine unloading

2012 / IEEE / 978-1-4673-2237-9
By: Yanping Li; Xie Xie; Yongyue Zheng;

Simulation of the virtual shape meter

2012 / IEEE / 978-1-4673-0199-2
By: Yanyan Sun; Meiling Li; Lingfu Kong; Fengshan Du; Fei Chen;

Research on application of intelligent immune bee colony algorithm for production scheduling

2012 / IEEE / 978-1-4673-0945-5
By: Jing Zhu; Yong Zhang;

Simulation research of integral controller in monitor AGC system

2012 / IEEE / 978-1-4577-2074-1
By: Zhang Hao-yu; Sun Jie; Zhang Dian-hua; Gu De-hao; Qin Da-wei;

Tension model and changing disciplinarian in FGC process in cold rolling

2012 / IEEE / 978-1-4577-2074-1
By: Hao Peifeng; Xue Dingyu;

Online calculation model of rolling force for cold rolling mill based on numerical integration

2012 / IEEE / 978-1-4577-2074-1
By: Sun Jie; Zhang Dian-hua; Chen Shu-zong; Song Jun; Wang Jun-sheng;

Ultrafine-grained ²-type titanium alloy with nonlinear elasticity and high ductility

2008 / American Institute of Physics
By: S. J. Li; T. C. Cui; Y. L. Li; Y. L. Hao; R. Yang;

Influence of thermal treatment on magnetocaloric properties of Gd cold rolled ribbons

2013 / American Institute of Physics
By: Sergey V. Taskaev; Vasiliy D. Buchelnikov; Anatoliy P. Pellenen; Michael D. Kuz'min; Konstantin P. Skokov; Dmitry Yu. Karpenkov; Dmitry S. Bataev; Oliver Gutfleisch;

The dislocation density and twin-boundary frequency determined by X-ray peak profile analysis in cold rolled magnetron-sputter deposited nanotwinned copper

2011 / American Institute of Physics
By: Gábor Csiszár; Levente Balogh; Amit Misra; Xinghang Zhang; Tamás Ungár;

Simulation system of cold rolling process operation optimization

2014 / IEEE
By: Lianjie Tang; Yue Hong; Siyuan Wu; Jian Wang;

Batch production planning method based on the order characteristics for cold mill

2014 / IEEE
By: Xian-Wen Gao; Li Wang; Qi Wang;

Study on Fabrication of Ni-5 at.%W Tapes for Coated Conductors from Cylinder Ingots

2015 / IEEE
By: Ma, L.; Grivel, J.; Liang, Y.R.; Wulff, A.C.; Zhao, Y.; Suo, H.L.;

Robust operation optimization in cold rolling production process

2014 / IEEE
By: Hong, Yue; Wang, Xianpeng;

Optimal control approach to two-stage inventory system in steel cold rolling production

2014 / IEEE
By: Baiyu Yang; Cong Cheng; Wenjie Xu;

High saturation ternary cobalt-iron basalt alloys

1988 / IEEE
By: Major, R.V.; Orrock, C.M.;

Anisotropy of DC magnetostriction in cold-rolled electrical sheets of Goss texture

1989 / IEEE
By: Soinski, M.;

Iron loss of tertiary recrystallized silicon steel

1989 / IEEE
By: Arai, K.I.; Mogi, H.; Ishiyama, K.;

Nondestructive evaluation of material properties with EMAT (formability in cold rolled steel sheets and residual stress in railroad wheel)

1989 / IEEE
By: Fukuoka, H.; Fujisawa, K.; Murayama, R.; Yonehara, S.; Hirao, M.;

The development of <100> texture in Fe-Cr-Co-Mo permanent magnet alloys

1991 / IEEE
By: Satoh, H.; Sugimoto, S.; Homma, M.; Okada, M.;

Silver encased high temperature superconductor ribbons produced by rolling

1989 / IEEE
By: Wagner, G.R.; Powell, J.C.; Male, A.T.; Iyer, N.C.; Whitlow, G.A.;

Tertiary recrystallization and iron loss of ultra thin silicon steels

1990 / IEEE
By: Agatsuma, S.; Satoh, H.; Arai, K.I.; Ishiyama, K.;

Computer integrated manufacturing in no.3 cold strip mill at Fukuyama Works

1990 / IEEE / 0-8186-1966-X
By: Araki, T.; Yamamoto, M.; Takekoshi, A.; Iwamoto, M.;

The effect of textural through-thickness inhomogeneity on the prediction of the anisotropy of magnetocrystalline energy in silicon steels

1991 / IEEE
By: Blandford, P.; Szpunar, J.A.;

Bi-based high temperature superconducting tapes by cold rolling method

1991 / IEEE
By: Maartense, I.; Oberly, C.E.; Ho, J.; Barker, D.; Jones, T.; Brown, T.; Leese, R.; Kozlowski, G.;

Application of the LQG/LTR design method to a strip accumulator

1991 / IEEE / 0-8186-2190-7
By: Radman, G.; McNabb, J.H.;

Computerized AGC systems based on the constant volume flow equation

1992 / IEEE / 0-7803-0635-X
By: Zeng Suisan;

An autonomous decentralized process computer system for steel production

1993 / IEEE / 0-8186-3125-2
By: Yoshinaga, S.; Mashino, Y.; Yokota, H.;

Computer-based feedforward and constant volume flow AGC systems used on strip cold rolling mill

1992 / IEEE / 0-7803-0849-2
By: Suisan, Z.;

CIE integrated system for the CPCM (coupled pickle line and tandem cold mill) at Dofasco's Hamilton Works

1994 / IEEE
By: Petz, N.H.; Koziol, B.; Masumori, M.; Okitani, N.; Ishii, T.;

High-strength and high-conductivity Cu-Ag alloy sheets: new promising conductor for high-fieId Bitter coils

1994 / IEEE
By: Sakai, Y.; Maeda, H.; Inoue, K.;

Ag-2223 (Bi) tapes structure and superconducting properties in dependence of initial powder type

1994 / IEEE
By: Dontsova, E.S.; Nikulin, A.D.; Antipova, E.V.; Khlebova, N.E.; Shikov, A.K.; Akimov, I.I.; Klepatsky, V.E.; Kozlenkova, N.I.; Medvedev, M.I.; Vargin, V.A.; Kazakov, E.Y.;

Advanced set-up and control system for Dofasco's tandem cold mill

1994 / IEEE / 0-7803-1993-1
By: Habib, G.; Critchley, S.; Fukuda, M.; Okitani, N.; Hartman, D.R.; Sekiguchi, K.; Seki, Y.; Shaw, K.;

Gauge control in tandem cold rolling mills: a multivariable case study using /spl Hscr//sup /spl infin// optimization

1994 / IEEE / 0-7803-1872-2
By: Postlethwaite, I.; Geddes, J.;

Critical current densities at 77 K and 4.2 K of Bi(2223) tapes prepared by cold and hot deformation

1995 / IEEE
By: Hensel, B.; Grasso, G.; Flukiger, R.; Gladyshevskii, R.; Daumling, M.; Grivel, J.C.; Perin, A.; Jeremie, A.;

Transport properties of long monofilamentary Bi(2223) tapes

1995 / IEEE
By: Grasso, G.; Flukiger, R.; Jeremie, A.; Hensel, B.;

A comparative study of microstructure and transport critical current in cold rolled, cold uniaxially pressed and low load hot uniaxially pressed Ag-(Bi,Pb)/sub 2/Sr/sub 2/Ca/sub 2/Cu/sub 3/O/sub x/ tape

1995 / IEEE
By: Conti, S.; Garre, R.; Ashworth, S.P.; Evetts, J.E.; Glowacki, B.A.; James, M.P.;

Programmable controllers for special control applications in rolling mills

1995 / IEEE / 0-7803-2081-6
By: Suryanarayana, G.; Khera, S.K.; Kumar, V.S.; Rao, N.;

Production of ultra thin grain oriented silicon steel sheets

1995 / IEEE
By: Arai, K.L.; Ishiyama, K.; Nakano, M.;

The advanced set-up and control system for Dofasco's tandem cold mill

1996 / IEEE
By: Critchley, S.; Fukuda, M.; Okitani, N.; Seki, Y.; Habib, W.G.; Sekiguchi, K.; Shaw, K.; Hartman, D.;

Development of on-line measurement system of surface roughness for cold-rolled steel sheet

1996 / IEEE / 0-7803-3312-8
By: Daiwoo Kim; Lim, C.S.; Oh, K.J.;

Application of iterative learning control to coil-to-coil control in rolling

1995 / IEEE / 0-7803-2445-5
By: Srinivasan, K.; Garimella, S.S.;

Flexible manufacturing and high performance system for steel plants

1995 / IEEE / 0-8186-7125-4
By: Mori, J.;

The relationship of microstructure and magnetic properties in cold-rolled 6.5% Si-Fe alloy

1996 / IEEE
By: Tanaka, Y.; Bi, X.F.; Yamashiro, Y.; Ishiyama, K.; Arai, K.I.; Sato, K.;

Design of a robust thickness controller for a single-stand cold rolling mill

1996 / IEEE / 0-7803-2975-9
By: Kwang-Bae Kim; Sang-Rok Oh; Tae-Woong Yoon; Do-Hyun Kim; Hyun-Sik Ahn; Gun Hwang;

Application of new control system for cold tandem mill

1996 / IEEE / 0-7803-3544-9
By: Washikita, Y.; Okanoto, N.; Ishibashi, T.; Hitotsumatsu, E.; Nori, Y.;

Advanced AGC system for cold tandem mill based on ILQ design theory

1996 / IEEE / 0-7803-3590-2
By: Kadoya, Y.; Ooi, T.; Washikita, Y.; Seki, Y.;

Forecasting the steel productivity of a cold rolling sizing unit with the radial basis function neural network

1996 / IEEE / 0-7803-3590-2
By: Xudong Wang; Huihe Shao;

Reliable roll force prediction in cold mill using multiple neural networks

1997 / IEEE
By: Yongjung Cho; Sungzoon Cho; Sungchul Yoon;

Intelligent monitoring of sheet forming process

1996 / IEEE / 0-7803-3104-4
By: Debing Yang; Yaohuan Xu; Jianxin Hua; Jinwu Xu; Wang, D.D.;

Reduction of iron loss in thin grain-oriented silicon steel sheets

1997 / IEEE
By: Nakano, M.; Fukunaga, H.; Arai, K.I.; Ishiyama, K.;

Advances towards the rolling processing of long BSCCO tapes

1997 / IEEE
By: Miao, H.; Lera, F.; Larrea, A.; de la Fuente, G.F.; Navarro, R.;

Deformation-dominated texturing of superconducting filament in OPIT-fabricated Bi(Pb)SCCO-2223/Ag composite tapes

1997 / IEEE
By: Beilin, V.; Schieber, M.; Goldgirsh, A.;

A new approach to advanced cold mill drive systems

1997 / IEEE / 0-7803-4067-1
By: Seung-Ki Sul; Seung-Ho Song; Dae-Woong Chung; Jul-Ki Seok; Chang-Ho Choi; Byung-Ki Kwon; Jin-Seop Lee; Eung-Sang Cho; Won-Chang Shin; Ga-Woo Park;

Improvements in product quality in tandem cold rolling using robust multivariable control

1998 / IEEE
By: Geddes, E.J.M.; Postlethwaite, I.;

Application of iterative learning control to coil-to-coil control in rolling

1998 / IEEE
By: Garimella, S.S.; Srinivasan, K.C.;

The computer monitor system composed of Windows for Workgroups 3.11 for a reversible cold roll mill

1997 / IEEE / 0-7803-4253-4
By: Li Feng; Xu Yubin; Sun Zhiyi;

Multidimensional size control in rod bar rolling and cold strip rolling by using fuzzy method

1998 / IEEE / 0-7803-4530-4
By: Harakawa, T.; Kakimoto, S.; Baba, K.; Fujii, A.; Ogai, H.;

A real-time expert system with GPC for cold strip mill

1998 / IEEE / 0-7803-4530-4
By: Anke Xue; Youxian Sun;

A new method of flatness control in cold rolling process

1998 / IEEE / 0-7803-4530-4
By: Junfei Qiao; Cheng Shao; Tianyou Chai; Ge Guo;

Surface magnetic domain observation on thin-gauged 3% Si-Fe sheets by using scanning electron microscopy with polarization analysis (SEMPA)

1998 / IEEE
By: Heo, N.H.; Koymen, A.R.; Lee, Y.; Woo, J.S.; Na, J.G.;

Online quantification of the continuous-discrete structure of reactive real time systems using hybrid fuzzy-Boolean automata

1998 / IEEE / 0-7803-4778-1
By: Grantner, J.L.; Fodor, G.; Shakouri, H.;

Active compensation of roll eccentricity in rolling mills

1998 / IEEE / 0-7803-4943-1
By: Rigler, G.W.; Frank, H.; Aistleitner, K.; Schlacher, K.; Haas, W.; Kugi, A.;

Application of repetitive control to eccentricity compensation in rolling

1994 / IEEE / 0-7803-1783-1
By: Srinivasan, K.; Garimella, S.S.;

A comparative study of thermal effects on cold rolled copper induced by cathode spots and short laser pulses

1998 / IEEE / 0-7803-3953-3
By: Franz, U.; Siemroth, P.; Lepski, D.;

Fabrication of YBCO thick films on cube textured Ni substrate with NiO intermediate layer

1999 / IEEE
By: Zhou, L.; Wang, F.Y.; Wu, X.; Liu, C.F.; Yang, Z.J.; Wu, X.Z.; Zhang, P.X.; Feng, Y.;

Melt growth and superconducting properties of textured Ag-YBa/sub 2/Cu/sub 3/O/sub 7/ conductors

1999 / IEEE
By: Puig, T.; Pinol, S.; Chimenos, J.M.; Obradors, X.; Martinez, B.;

Bi/sub 2/Sr/sub 2/CaCu/sub 2/O/sub x//Ag multilayer tapes with J/sub c/ (4.2 K, 10 T) of 500,000 A/cm/sup 2/ by using PAIR process

1999 / IEEE
By: Kumakura, H.; Kitaguchi, H.; Koizumi, T.; Hasegawa, T.; Miao, H.; Togano, K.;

Influence of Ag substrates on grain alignment and critical current density of Bi-2212 tape conductors

1999 / IEEE
By: Sato, J.; Muroga, T.; Togano, K.; Kitaguchi, H.; Kumakura, H.; Okada, M.;

Subspace model identification and H/sup /spl infin// servo control of tandem cold mill

1999 / IEEE / 4-907764-13-8
By: In Soo Kim; Man Hyung Lee; I Cheol Hwang; Yu Shin Chang;

Artificial intelligence approach to the modeling of rolling loads in technology design for cold rolling processes

1999 / IEEE / 0-7803-5489-3
By: Kusiak, J.; Dudek, K.; Lenard, J.G.;

Next Page