Your Search Results

Use materials about this topic in your textbook!

AcademicPub holds over eight million pieces of educational content - such as case studies and journal articles - for you to mix-and-match your way.

Experience the freedom of customizing your course pack with AcademicPub!
Not an educator but still interested in using this content? No problem! Visit our provider's page to contact the publisher and get permission directly.

Topic: Casting

Results

President's report
1983 / IEEE
Bulk Nanocrystalline Nd-Fe-B Magnets Solidified in Magnetic Field With Various Surface Area-to-Volume Ratios
2011 / IEEE
By: Wang, C.; Sun, A.C.; Chang, H.W.; Chang, W.C.; Hsieh, C.C.; Lai, Y.S.;
High Induction, Low Loss FeCo-Based Nanocomposite Alloys With Reduced Metalloid Content
2011 / IEEE
By: Huth, J.; Keylin, V.; Shen Shen; Miller, K.J.; Kernion, S.J.; McHenry, M.E.;
Effect of External Constant Magnetic Field on Weld Nugget of Resistance Spot Welded Dual-Phase Steel DP590
2011 / IEEE
By: Yong Bing Li; Qi Shen; Guan Long Chen; Zhong Qin Lin;
Effect of Composition and Structure on the Properties of Ti Containing Nd-Fe-B Rapidly Quenched Alloys
2012 / IEEE
By: Kaszuwara, W.; Michalski, B.; Spyra, M.; Leonowicz, M.K.; Derewnicka, D.;
Experimental Study of a Centrifugal Conductive MHD Pump
2012 / IEEE
By: Katsnelson, S.S.; Pozdnyakov, G.A.;
Morphology-Based Crack Detection for Steel Slabs
2012 / IEEE
By: Landstrom, A.; Thurley, M.J.;
Microstructure and dielectric characterization of micro- nanosize co-filled composite films with high dielectric permittivity
2011 / IEEE
By: Yue Yu; Jun-Wei Zha; Zhi-Min Dang; Sheng-Tao Li; Hong-Tao Song; Tao Zhou;
Design and Fabrication of Soft Artificial Skin Using Embedded Microchannels and Liquid Conductors
2012 / IEEE
By: Wood, R.J.; Bor-Rong Chen; Yong-Lae Park;
Design of Complex Structured Monolithic Heat Sinks for Enhanced Air Cooling
2012 / IEEE
By: Hernon, D.; Krishnan, S.; Lyons, A.M.; Mullins, J.; Hodes, M.;
A Thermoelectric Energy Harvester Directly Embedded Into Casted Aluminum
2012 / IEEE
By: Pille, C.; Pleteit, H.; Ibragimov, A.; Lang, W.;
Field Emission Tip Array Fabrication Utilizing Geometrical Hindrance in the Oxidation of Si
2012 / IEEE
By: Ya-Hong Xie; Wei Zhang; Jae Young Lee; Biyun Li; Schroeder, T.; Ke Sun; Russell, T.P.; Xinyu Wei; Katzer, J.;
Hollow Out-of-Plane Polymer Microneedles Made by Solvent Casting for Transdermal Drug Delivery
2012 / IEEE
By: Stoeber, B.; Hafeli, U.O.; Mansoor, I.;
An efficient Ray Casting method for terrain visualization
2011 / IEEE / 978-1-61284-774-0
By: Jianxin Luo; Yifeng Duan; Jinsong Jiang; Guyu Hu; Guiqiang Ni; Qin Feng; Bai Wang;
Finite element solution method on power loss of plateau type and epoxy resin casting current transformer
2011 / IEEE / 978-1-4244-9439-2
By: Li Zhang; Yu Zhang;
Effect of stirring power on semisolid A356 alloy slurry prepared by low superheat pouring
2011 / IEEE / 978-1-4244-9439-2
By: Xiao-mei Liu; Zheng Liu;
Study of blend films from methacryloyl guar gum and sodium alginate
2011 / IEEE / 978-1-4244-9439-2
By: Litao Dong; Wenfa Xiao;
Antenna-environment multiple scattering in reverberation chamber measurements
2011 / IEEE / 978-1-4244-9563-4
By: Remley, K.A.; Pirkl, R.J.;
Evaluating surface roughness of castings using K-means clustering and watershed transform
2011 / IEEE / 978-1-61284-774-0
By: Qingmin Liao; Chao Liang; Xi Zhang; Wenming Yang;
Surface roughness measurement for castings based on wavelet energy
2011 / IEEE / 978-1-61284-774-0
By: Fei Zhou; Wenming Yang; Xi Zhang; Qingmin Liao;
Research on the fracture toughness test methods for high grade pipeline steel
2011 / IEEE / 978-1-4244-9439-2
By: Wenbin Qiu; Zhen-an He; Rong Guo;
Fracture analysis for brake drum of the truck
2011 / IEEE / 978-1-4244-9439-2
By: Xie Jing-pei; Wang Wen-yan; Ga O-lu;
The hot state test research of nozzle character on secondary cooling zone of slab continuous casting process
2011 / IEEE / 978-1-4244-9439-2
By: Dingbiao Wang; Bing Liu;
Analysis and prevention of casting cracks of small tractor gearbox
2011 / IEEE / 978-1-4244-9439-2
By: Yuanjun Dai; Yigong Lu; Yuxin Sun; Yan He;
Two different machine assignment methods for steelmaking and continuous casting
2011 / IEEE / 978-1-61284-774-0
By: Jinfei Sun; Xiuying Wang;
Construction-control technique for PC bridge with cantilever casting method
2011 / IEEE / 978-1-4244-9439-2
By: Junwu Niu; Mi Zhou; Changmin Li;
Repair welding of the crack on the large steel casting
2011 / IEEE / 978-1-4244-9439-2
By: Yumin Yang;
Dynamic analysis of the oscillation system for continues casting mold
2011 / IEEE / 978-1-4244-9439-2
By: Qunfeng Fu; Fengjiao Du;
Effect of electromagnetic stirring on the formation of primary phase of Al-Si alloys
2011 / IEEE / 978-1-61284-774-0
By: Xuefeng Zhang; Linfeng Li; Yaohua Que;
Active Disturbance Rejection Control utilized in oscillation device electro-hydraulic servo system
2011 / IEEE / 978-988-17255-9-2
By: Wang Junzheng; Zhao Jiangbo; Jia Dong; Reng Guangtong;
Study of 3-D seismic volume visualization with Ray Casting
2011 / IEEE / 978-1-61284-486-2
By: Youkai Sun; Qifeng Sun;
A Relative Green Degree Evaluation Model for Equipments of Iron and Steel Enterprises
2011 / IEEE / 978-1-4244-6581-1
By: Zhou Min; Zhang Hua; Liu Jun-wei; Wang Guo-feng; Wang Lei;
Application of moment invariants in checking the overall dimension of the head cover
2011 / IEEE / 978-1-61284-088-8
By: Fei Sha; Xu Li;
Research on fatigue life of the casting crane's girder by using damnification limits design method
2011 / IEEE / 978-1-61284-088-8
By: Zhicheng Huang;
Using the Theory of Inventive Problem-Solving (TRIZ) to Implement Safety Improvements in Foundry Engineering Pouring Procedures
2011 / IEEE / 978-1-4244-6581-1
By: Su-Chen Huang; Tai-Chang Hsia;
A modeling module for stereolithography based investment casting resin model
2011 / IEEE / 978-1-4577-0536-6
By: Jihong Zhu; Xiaojun Gu; Junshuo Li;
Elastic vibration research of the non-sinusoidal oscillation system for the mold of continuous casting
2011 / IEEE / 978-1-61284-088-8
By: Liping Zhang;
Advances in relaxor ferroelectric terpolymer: New applications
2011 / IEEE / 978-1-4577-1163-3
By: Capsal, J.F.; Bauer, F.; Domingues Dos Santos, F.; Larcher, Q.;
Research on the layout optimization method for ceramic core locator in investment casting die
2011 / IEEE / 978-1-61284-088-8
By: Yejian Yao; Dezhong Zhao; Wenhu Wang;
Study on rotary impeller refinement of 4004 Al alloy
2011 / IEEE / 978-1-61284-088-8
By: Xinyu Lv; Pengao Xu; Guojian Cao; Erjun Gou; Yanling Zhao; Lin Ma; Guojun Wang;
Modeling and simulation of quality analysis of internal cracks based on FTA in continuos casting billet
2011 / IEEE / 978-1-4244-9600-6
By: Wenhong Liu; Hong Chen; Zhi Xie;
Modeling of solidification of ZM5 shell and optimization of casting parameters
2011 / IEEE / 978-1-4577-0399-7
By: Erjun Guo; Liping Wang; Sicong Zhao;
Study on a new adjustable hydraulic positioning system
2011 / IEEE / 978-1-61284-722-1
By: Zhang Yaqin;
Efficiency analysis of an induction motor with direct torque and flux control at a hot rolling mill
2011 / IEEE / 978-0-9814311-6-1
By: Gouws, R.;
Development of PVdF based pressure sensor for low pressure application
2011 / IEEE / 978-1-61284-777-1
By: Gangal, S.A.; Bodas, D.; Mahale, B.P.;
Evaluation of Ion Jelly biopolymer on glucose biosensing
2011 / IEEE / 978-1-4577-0522-9
By: Fonseca, L.P.; Cabral, J.M.S.; Osterreicher, J.; Lourenco, N.M.T.; Barreiros, S.; Vidinha, P.;
Blending of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) and polycaprolactone: Characterization and degradation studies
2011 / IEEE / 978-1-4244-9277-0
By: Swee-Hin Teoh; Teo, E.Y.; Qin-yuan Zhang; Zu-yong Wang; Jing Lim; Feng Wen;
Particle swarm optimization for estimation on mould oscillation for continuous casting process
2011 / IEEE / 978-1-4244-9953-3
By: Xudong Wang; Man Yao; Zhaofeng Wang;
Combined water seam crystallizer's thermal field analysis and simulation
2011 / IEEE / 978-1-4244-9718-8
By: Junling Hu; Dachao Hu;
Neural networks for solving the inverse heat transfer problem of continuous casting mould
2011 / IEEE / 978-1-4244-9953-3
By: Yao Man; Wang Xudong;
Study on fatigue life of casting crane girder's structure based on Finite element method and fracture mechanics
2011 / IEEE / 978-1-4244-8625-0
By: Zhicheng Huang;
Microscale study of electrical characteristics of epoxy-multiwall carbon nanotube nanocomposites
2011 / IEEE / 978-1-61284-777-1
By: Cheng Yan; Njuguna, M.K.; Yarlagadda, P.K.D.V.; Bell, J.M.;
Mold level control based on fuzzy neural network
2011 / IEEE / 978-1-4577-0321-8
By: Wang Jianhui; Fang Xiaoke; Ma Minghong;
The analysis and research on the main bridge of Changxin viaduct
2011 / IEEE / 978-1-4244-8165-1
By: Wending Zhao; Wenhua Wang;
User study of the improved Helios voting system interfaces
2011 / IEEE / 978-1-4577-1183-1
By: Olembo, M.M.; Kauer, M.; Karayumak, F.; Volkamer, M.; Volk, T.;
Flow rate estimation using unscented Kalman filter in automatic pouring robot
2011 / IEEE / 978-4-907764-39-5
By: Birkhold, M.; Noda, Y.; Verl, A.; Sawodny, O.; Terashima, K.;
Anomaly detection for high precision foundries
2011 / IEEE / 978-1-4577-0434-5
By: Ugarte-Pedrero, X.; Santos, I.; Nieves, J.; Bringas, P.G.;
Integrative factory design for a casting facility for TiAl-components
2011 / IEEE / 978-3-943024-05-0
By: Aguiliar, J.; Wesch, C.; Noecker, J.; Hilchner, R.; Burggraef, P.; Hecht, U.; Schmitz, G.J.; Kampker, A.; Schuh, G.; Guntlin, R.; Schievenbusch, A.; Franzkoch, B.;
Vote casting device with VV-SV-PAT for elections with complicated ballot papers
2011 / IEEE / 978-1-4577-0953-1
By: Volkamer, M.; Demirel, D.; Budurushi, J.;
Focus group views on Pr��oter 1.0
2011 / IEEE / 978-1-4577-0953-1
By: Culnane, C.; Llewellyn, M.; Schneider, S.; Zhe Xia; Srinivasan, S.; Heather, J.;
Research on slab surface temperature-measurement of continuous casting based on CCD imaging
2011 / IEEE / 978-1-4244-8161-3
By: Bai Xiaoqing; Yan Junhong;
Computational Prediction Model of Macrosegregation in Continuously Casting Steel Blooms
2011 / IEEE / 978-1-4577-0755-1
By: Li Ying; Zhai Yingying; Zhang Yu; Yan Chen;
Inheritance and Modularity in Specification and Verification of OO Programs
2011 / IEEE / 978-1-4577-1487-0
By: Qiu Zongyan; Ali, H.; Liu Yijing;
A New Foveation Ray Casting Approach for Real-Time Rendering of 3D Scenes
2011 / IEEE / 978-1-4577-1079-7
By: Wei Chen; Xin Zhang; Qunsheng Peng; Chuan Zhu; Zhonglei Yang;
Assumption Hierarchy for a CHA Call Graph Construction Algorithm
2011 / IEEE / 978-1-4577-0932-6
By: Sawin, J.; Rountev, A.;
Preparation and Properties of Novel Sulfonated Poly (phenylene arylene) (SPA) Membranes for Fuel Cell Applications
2011 / IEEE / 978-1-4577-0755-1
By: Zhaoxia Hu; Yanli Pu; Xuan Zhang; Shouwen Chen; Ying Ling; Shanshan Chen;
High resolution THz spectroscopy of ammonium nitrate and potassium nitrate crystalline films
2011 / IEEE / 978-1-4577-0509-0
By: Qadri, S.; Khachatrian, A.; Melinger, J.S.;
Busting the myth
2011 / IEEE / 978-0-933957-39-8
By: Rich, M.; Powell, C.; Strubhar-Masick, R.; Lloyd, A.; Bennett, A.;
Influence of processing flaws on cytotoxicity and genotoxicity of Co-Cr and Ni-Cr based dental crowns and bridges
2011 / IEEE / 978-1-4577-0554-0
By: Altas, E.; Urkmez, A.S.; Gurhan, I.D.;
Dispersion of the casting replication process for microfluidic structures
2011 / IEEE / 978-1-61284-172-4
By: Dascalu, D.; Muller, R.; Obreja, P.; Stanciu, I.;
Casting production of coils for electrical machines
2011 / IEEE / 978-1-4577-1370-5
By: Schmidt, D.; Ponick, B.; Pleteit, H.; Kock, A.; Horch, F.; Groninger, M.; Wostmann, F.;
Optimized spread spectrum watermarking for fading-like collusion attack
2011 / IEEE / 978-2-908849-25-7
By: Maity, S.P.; Sil, J.; Maity, S.; Delpha, C.;
Utilization of poly/chitosan as membrane for wastewater treatment
2011 / IEEE / 978-1-4577-1549-5
By: Kasmuri, N.H.; Othman, N.H.; Idrus, N.F.;
Synthesis, properties of novel benzocyclobutene-functionalized siloxane thermosets
2011 / IEEE / 978-1-4673-0149-7
By: Jun Yang; Fei Xiao; Yuanrong Cheng; Yunxia Jin;
Preparation of micro fluidic chip based on SU-8 mold
2011 / IEEE / 978-1-4577-1997-4
By: Yuan-Qing Wu; Su-Ying Yao;
Dielectric behaviour of polyperyleneimide films
2011 / IEEE / 978-1-61284-172-4
By: Bruma, M.; Rusu, R.; Damaceanu, M.;
Efficient S/W framework for S/W reuse of steel manufacturing process system
2011 / IEEE / 978-1-61284-972-0
By: Lee, J.; Park, Y.;
Silk - new opportunities in optics and photonics for an ancient material
2011 / IEEE / 978-1-4244-8939-8
By: Omenetto, F.G.;
An improved fast ray casting volume rendering algorithm of medical image
2011 / IEEE / 978-1-4244-9352-4
By: Qian Zhi-Yu; Tao Ling;
Human guidance and supervision of a manufacturing system for semi-automated production
2011 / IEEE / 978-1-4577-1084-1
By: Soffker, D.; Langer, M.;
GPU based calculation of a SPECT projection operator for content adaptive mesh model
2011 / IEEE / 978-1-4673-0120-6
By: Massanes, F.; Brankov, J.G.;
Tensile and swelling properties of polyvinyl alcohol/chitosan/halloysite nanotubes nanocomposite
2011 / IEEE / 978-1-4577-1884-7
By: Ismail, H.; Khoo, W.S.; Ariffin, A.;
Designing Phantoms for Industrial Computed Tomography
2011 / IEEE / 978-1-4673-0349-1
By: Kyoonyun Kim; Jin-Seok Yang; Jeong-Ho Hwang; Chae-Ho Lim; Seung-Mok Yoo; In-Sung Cho;
Synthesis and Characterization of Hot-Pressed Solid Polymer Electrolytes
2011 / IEEE / 978-1-4577-2037-6
By: Bhatt, A.; Thakur, S.S.; Chandra, A.; Chandra, A.;
Ion Transport Properties of Hot-Pressed Solid Polymer Electrolytes: (1-x) PEO: x NaHCO3
2011 / IEEE / 978-1-4577-2037-6
By: Chandra, A.; Bhatt, A.; Chandra, A.;
Effect of polyvinyl alcohol on tensile properties and morphology of sago starch plastic films
2011 / IEEE / 978-1-4577-1884-7
By: Ismail, H.; Zaaba, N.F.;
Fabrication of circular and Profiled Conformal Cooling Channels in aluminum filled epoxy injection mould tools
2011 / IEEE / 978-1-4577-1884-7
By: Raghavan, V.R.; Rani, A.M.A.; Altaf, K.;
Volume Data Numerical Integration and Differentiation Using CUDA
2011 / IEEE / 978-0-7695-4576-9
By: Yang-Lang Chang; Tung-Ju Hsieh; Ming-Da Chen;
Embossed ceramic reflectors with nano dispersive coatings for compact optoelectronic systems
2011 / IEEE / 978-0-9568086-0-8
By: Heymel, A.; Brode, W.; Bartnitzek, T.; Richter, H.; Buss, W.; Walther, T.;
Beam Casting Implicit Surfaces on the GPU with Interval Arithmetic
2011 / IEEE / 978-0-7695-4548-6
By: Ganacim, F.; Nehab, D.; de Figueiredo, L.H.;
Automated Inspection Using X-Ray Imaging
2011 / IEEE / 978-1-4577-2135-9
By: Wenfei Chen; Delie Ming; Zuohua Miao;
Cover System in Dynamic Environment
2012 / IEEE / 978-1-4577-2120-5
By: Jun Lai; Feng Jiang; Wei Tang;
A dry nanoparticle embedding technique for fabrication of magnetic polymer micropillars
2012 / IEEE / 978-1-4673-0325-5
By: Mu Chiao; Khademolhosseini, F.;
A multi-physics model for microwave heating in metal casting applications embedding a mode stirrer
2012 / IEEE / 978-3-9812668-4-9
By: Saal, P.; Kilic, E.; Ramakrishnan, R.; Wiedenmann, O.; Eibert, T.F.; Siart, U.;
Low cost solar grade silicon by recycling cast ingot rejects
2011 / IEEE / 978-1-4244-9965-6
By: Bragagnolo, J.A.; Hayes, M.; Mott, J.R.; Bucher, C.E.;
Identification and characterization of performance limiting regions in poly-Si wafers for PV cells
2011 / IEEE / 978-1-4244-9965-6
By: Guthrey, H.; Al-Jassim, M.; Gorman, B.;
Microstructure and mechanical properties of Al-Si cast alloy grain refined with Ti-B-Sr-Sc-Mg
2011 / IEEE / 978-1-4673-0020-9
By: Arawi, A.Z.O.; Talari, M.K.; Ramli, R.;
Vehicle scheduling and dispatching of ready mixed concrete
2011 / IEEE / 978-1-61284-375-9
By: Menglei Li; Yang Zhang; Zhenyuan Liu;
A new language to define bioinformatics workflows using Web services
2011 / IEEE / 978-1-4673-0319-4
By: Mokhtar, H.M.O.; Nagy, W.;
Proton exchange membranes based on aryl epoxy resin for fuel cells operated at elevated temperatures
2012 / IEEE / 978-1-4673-1124-3
By: Pen-Cheng Wang; Chia-Jung Chang; Tsung-Cheng Ho; Tung-Yuan Lee; Fan-Gang Tseng;

Next Page
Return To Top