Your Search Results

Use materials by this author in your textbook!

AcademicPub holds over eight million pieces of educational content – such as case studies and journal articles – for you to mix-and-match your way.

Experience the freedom of customizing your course pack with AcademicPub!
Not an educator but still interested in using this content? No problem! Visit our provider's page to contact the publisher and get permission directly.

Author: Mohammed, O.A.

Results

Optimum Equivalent Models of Multi-Source Systems for the Study of Electromagnetic Signatures and Radiated Emissions From Electric Drives
2012 / IEEE
By: Mohammed, O.A.; Barzegaran, M.; Sarikhani, A.;
A Generalized Equivalent Source Model of AC Electric Machines for Numerical Electromagnetic Field Signature Studies
2012 / IEEE
By: Barzegaran, M.R.; Mohammed, O.A.;
A Wavelet Filtering Scheme for Noise and Vibration Reduction in High-frequency Signal Injection-Based Sensorless Control of PMSM at Low Speed
2012 / IEEE
By: Nejadpak, A.; El-Tallawy, A.M.; Khan, A.A.; Mohammed, O.A.; Roberts, M.J.;
Laboratory-Based Smart Power System, Part I: Design and System Development
2012 / IEEE
By: Mohammed, O.A.; Mazloomzadeh, A.; Mohamed, A.; Salehi, V.;
Laboratory-Based Smart Power System, Part II: Control, Monitoring, and Protection
2012 / IEEE
By: Mazloomzadeh, A.; Mohamed, A.; Salehi, V.; Mohammed, O.A.;
HIL-Based Finite-Element Design Optimization Process for the Computational Prototyping of Electric Motor Drives
2012 / IEEE
By: Sarikhani, A.; Mohammed, O.A.;
Sensorless Control of PM Synchronous Machines by Physics-Based EMF Observer
2012 / IEEE
By: Sarikhani, A.; Mohammed, O.A.;
Demagnetization Control for Reliable Flux Weakening Control in PM Synchronous Machine
2012 / IEEE
By: Mohammed, O.A.; Sarikhani, A.;
DC-bus voltage control for hybrid 4-port high frequency parallel-connected sustainable energy conversion system
2011 / IEEE / 978-1-4577-0061-3
By: Amin, M.M.; Mohammed, O.A.;
Inter-turn fault modeling of a variable speed pm wind generator using physics-based approach
2011 / IEEE / 978-1-4577-0061-3
By: Mohammed, O.A.; Sarikhani, A.;
Development of transient FE-physics-based model of induction for real time integrated drive simulations
2011 / IEEE / 978-1-4577-0061-3
By: Sarikhani, A.; Mohammed, O.A.;
A wavelet based multi-resolution controller for sensorless position control of PM synchronous motors at low speed
2011 / IEEE / 978-1-4577-0061-3
By: Mohamed, A.; Nejadpak, A.; Mohammed, O.A.;
Design and implementation of dc-bus system module for parallel integrated sustainable energy conversion systems
2011 / IEEE / 978-1-4577-1002-5
By: Amin, M.M.; Mohammed, O.A.;
Online gain scheduling of multi-resolution Wavelet-based controller for acoustic noise and vibration reduction in sensorless control of PM-synchronous motor at low speed
2011 / IEEE / 978-1-4577-1002-5
By: Khan, A.A.; Mohammed, O.A.; Mohamed, A.; Nejadpak, A.;
High-quality integration of fuel cells energy into electric grids
2011 / IEEE / 978-1-4244-9294-7
By: Mohamed, A.; Mohammed, O.A.; Elshaer, M.A.;
An equivalent source model for the study of radiated electromagnetic fields in multi-machine electric drive systems
2011 / IEEE / 978-1-4577-0811-4
By: Sarikhani, A.; Barzegaran, M.R.; Mohammed, O.A.;
Integration of sustainable energy sources into DC zonal electric distribution systems
2011 / IEEE / 978-1-4577-1002-5
By: Elshaer, M.; Mohammed, O.A.; Mohamed, A.;
A three-phase high frequency semi-controlled battery charging power converter for plug-in hybrid electric vehicles
2011 / IEEE / 978-1-4577-0541-0
By: Mohammed, O.A.; Amin, M.M.;
Smart optimal control of DC-DC boost converter for intelligent PV systems
2011 / IEEE / 978-1-4577-0809-1
By: Elshaer, M.; Mohammed, O.A.; Mohamed, A.;
Real-time power system analysis and security monitoring by WAMPAC systems
2012 / IEEE / 978-1-4577-2159-5
By: Salehi, V.; Mohammed, O.A.; Fernandez, J.F.; Mazloomzadeh, A.;
A novel grid-connected multi-input boost converter for HEVs: Design and implementation
2012 / IEEE / 978-1-4673-1561-6
By: Mohammed, O.A.; Amin, M.M.;
Functional ON/OFF behavioral modeling of power IGBT using system identification methods
2012 / IEEE / 978-1-4577-1216-6
By: Mohammed, O.A.; Nejadpak, A.;
Real-Time Implementation of Multiagent-Based Game Theory Reverse Auction Model for Microgrid Market Operation
2015 / IEEE
By: Martin, H.; Cintuglu, M.H.; Mohammed, O.A.;
Optimal Charging of Plug-in Electric Vehicles for a Car-Park Infrastructure
2014 / IEEE
By: Ma, T.; Mohammed, O.A.;
Real-Time Operation and Harmonic Analysis of Isolated and Non-Isolated Hybrid DC Microgrid
2014 / IEEE
By: Farhadi, M.; Mohammed, O.A.;
Improvements in RF monitoring system on generators
1989 / IEEE
By: Mohammed, O.A.; Mundulas, J.M.;
A listing of continuing education courses in electric power engineering-1988
1989 / IEEE
By: Fleming, P.J.; Smith, J.C.; Demerdash, N.A.; Aimone, M.A.; Puttgen, H.B.; Truax, C.J.; Stambach, M.R.; Garg, V.K.; Schmehl, T.G.; Roark, C.; Malukutla, S.S.; Mohammed, O.A.; McCart, W.C.; Makram, E.B.;
A finite element/superposition technique for the design of electromagnetically coupled coils
1989 / IEEE
By: Mohammed, O.A.; Garcia, L.F.;
Analysis of rotating machine concepts in the energy conversion laborator from experimental data
1991 / IEEE
By: Mohammed, O.A.; Gordon, H.W.;
An optimum finite element automatic grid generator for electromagnetic field computations
1988 / IEEE
By: Garcia, L.F.; Mohammed, O.A.;
Evaluation of implantable telemetry system performance using the CCETS software
1988 / IEEE / 0-7803-0785-2
By: Mohammed, O.A.;
The ISP technique 3D electromagnetic and eddy current computations in general media
1990 / IEEE
By: Mohammed, O.A.; Zhang, X.; Uler, F.G.;
Calculations of potential distributions produced by implanted electrodes in a man model by finite elements
1990 / IEEE
By: Hagmann, M.J.; Mohammed, O.A.; Uler, F.G.;
3-D finite element time-varying fields and eddy currents in nonlinear thin steel channels
1991 / IEEE
By: Mohammed, O.A.; Uler, F.G.;
A dynamic programming-finite element procedure for the design of nonlinear magnetic devices
1990 / IEEE
By: Mohammed, O.A.; Jones, W.K.;
A computer controlled energy conversion laboratory for electrical engineering students
1990 / IEEE
By: Mohammed, O.A.; Gordon, H.W.;
3-D finite element grid generation in electromagnetics
1990 / IEEE
By: Uler, F.G.; Mohammed, O.A.;
A state space modular approach and software for power electronics applications
1990 / IEEE
By: Jones, W.K.; Zhou, M.; Mohammed, O.A.;
A state space approach and formulation for the solution of nonlinear 3-D transient eddy current problems
1992 / IEEE
By: Mohammed, O.A.; Uler, F.G.;
An electrostatic coupler for radio frequency monitoring on generators
1989 / IEEE
By: Mohammed, O.A.; Mundulas, J.;
An optimum finite element grid generator for triangulating rotating and fixed objects in electromagnetics
1989 / IEEE
By: Mohammed, O.A.; Garcia, L.F.;
On the use of finite elements and dynamic programming for prediction of electromagnetic device geometries
1989 / IEEE
By: Mohammed, O.A.;
A performance evaluation software for medical telemetry systems
1989 / IEEE
By: Mohammed, O.A.;
Optimal design of nonlinear magnetic circuits by finite elements and a dynamic programming approach
1991 / IEEE / 0-7803-0033-5
By: Mohammed, O.A.; Uler, F.G.; Park, D.C.;
A new iterative scalar potential method for 3D eddy current calculations in electrical devices
1991 / IEEE / 0-7803-0033-5
By: Uler, F.G.; Mohammed, O.A.;
Determination of implanted electrode potential distributions in a man model
1991 / IEEE / 0-7803-0033-5
By: Uler, F.G.; Mohammed, O.A.; Hagmann, M.J.;
Design optimization of electromagnetic devices using artificial neural networks
1992 / IEEE
By: Ziqiang, C.; Uler, F.G.; Park, D.C.; Mohammed, O.A.;
An inverse technique for the design of electromagnetic devices
1988 / IEEE
By: Mohammed, O.A.;
Fast solution techniques in 3D electromagnetic field problems
1988 / IEEE
By: Mohammed, O.A.;
A miniature DC-DC converter for medical implants
1988 / IEEE
By: Mohammed, O.A.;
Automatic finite element grid generation in electromagnetics
1988 / IEEE
By: Mohammed, O.A.; Garcia, L.F.;
Comparison of two techniques for the solution of the 3-D nonlinear transient eddy current problem
1992 / IEEE / 0-7803-0494-2
By: Mohammed, O.A.; Uler, F.G.;
Detailed 2-D and 3-D finite element modeling of the human body for the evaluation of defibrillation fields
1993 / IEEE
By: Mohammed, O.A.; Uler, F.G.;
Design optimization of electromagnetic devices using artificial neural networks
1993 / IEEE / 0-7803-1217-1
By: Mohammed, O.A.; Uler, F.G.; Park, D.C.;
A state space technique for the solution of nonlinear 3-D transient eddy current problems
1991 / IEEE
By: Mohammed, O.A.; Uler, F.G.;
Utilizing Hopfield neural networks and an improved simulated annealing procedure for design optimization of electromagnetic devices
1993 / IEEE
By: Merchant, R.S.; Mohammed, O.A.; Uler, F.G.;
A 3-D finite element mesh generator for complex volumes
1994 / IEEE
By: Mohammed, O.A.; Uler, F.G.;
An intelligent system for design optimization of electromagnetic devices
1994 / IEEE
By: Mohammed, O.A.; Uler, F.G.; Merchant, R.;
Detection of magnetic body using artificial neural network with modified simulated annealing
1994 / IEEE
By: Chang Seop Koh; Song-Yop Hahn; Mohammed, O.A.;
Design optimization of electromagnetic devices using shape design sensitivity analysis
1994 / IEEE / 0-7803-1797-1
By: Song-yop Hahn; Mohammed, O.A.; Chang Seop Koh;
An automatic two-area interconnected system load-frequency control design
1994 / IEEE / 0-7803-1797-1
By: Mohammed, O.A.; Khatibi, M.H.;
Forecasting peak loads with neural networks
1994 / IEEE / 0-7803-1797-1
By: Mohammed, O.A.; Garcia, L.F.;
Utilizing genetic algorithms for the optimal design of electromagnetic devices
1994 / IEEE
By: Uler, G.F.; Chang-Seop Koh; Mohammed, O.A.;
Implementation of an adaptive neural network short-term electric load forecasting system in the energy control center
1994 / IEEE / 0-7803-1901-X
By: Merchant, R.S.; Park, D.C.; Mohammed, O.A.;
Nonlinear shape design sensitivity analysis of magnetostatic problems using boundary element method
1995 / IEEE
By: Chang Seop Koh; Song-Yop Hahn; Mohammed, O.A.;
Design optimization of electrical machines using genetic algorithms
1995 / IEEE
By: Uler, G.F.; Chang-Seop Koh; Mohammed, O.A.;
Design optimization of geometric boundaries in electromagnetic devices by artificial neural networks
1993 / IEEE / 0-7803-1257-0
By: Uler, F.G.; Park, D.C.; Mohammed, O.A.;
Shape design optimization in non-linear magnetic problems using simulated annealing with complex strategy
1995 / IEEE
By: Wang Fengxiang; Yao Yingying; Bai Baodong; Xie Dexin; Mohammed, O.A.;
Optimal transposition design of transformer windings by Genetic Algorithms
1995 / IEEE
By: Cui Jiefan; Xie Dexin; Bai Baodong; Mohammed, O.A.;
Ancillary techniques for the practical implementation of GAs to the optimal design of electromagnetic devices
1996 / IEEE
By: Uler, G.F.; Mohammed, O.A.;
Practical issues in the application of genetic algorithms to optimal design problems in electromagnetics
1996 / IEEE / 0-7803-3088-9
By: Mohammed, O.A.;
Utilizing genetic algorithms for the optimal design of electromagnetic devices
1995 / IEEE / 0-7803-2642-3
By: Uler, G.F.; Mohammed, O.A.;
Design optimization of a superferric octupole using various evolutionary and deterministic techniques
1997 / IEEE
By: Uler, F.G.; Mohammed, O.A.; Kasper, M.; Russenschuck, S.;
A hybrid technique for the optimal design of electromagnetic devices using direct search and genetic algorithms
1997 / IEEE
By: Uler, G.F.; Mohammed, O.A.;
A real-time experimental-analysis system for the undergraduate electric energy laboratory
1997 / IEEE / 0-7803-3844-8
By: Mohammed, O.A.; Sebastien, R.Y.;
GA optimization in electrical devices
1997 / IEEE / 0-7803-4178-3
By: Mohammed, O.A.;
Computer based simulation for optimizing overvoltage protective devices for low voltage applications
1998 / IEEE / 0-7803-4391-3
By: Mohammed, O.A.; Siegert, R.;
A real-time electromagnetic field analysis system for the energy conversion laboratory
1998 / IEEE / 0-7803-4391-3
By: Mohammed, O.A.; Sebastien, R.Y.;
Finite Element Modeling Of Man For The Evaluation Of Implanted Electrodes
1991 / IEEE / 0-7803-0216-8
By: Cler, F.G.; Mohammed, O.A.;
Implanted Electrodes Potential Distribution In A Man Model
1990 / IEEE / 0-87942-559-8
By: Uler, F.G.; Hagmann, M.J.; Mohammed, O.A.;
A real-time electromagnetic analysis of electric machines for educational purposes and laboratory implementation
1998 / IEEE
By: Mohammed, O.A.; Sebastien, R.Y.;
An implementation of a real-time experimental/analysis system for the energy conversion laboratory
1999 / IEEE / 0-7803-5237-8
By: Roig, G.; Sebastien, R.Y.; Mohammed, O.A.;
Selection of varistor for surge protection purposes based on their voltage-current characteristic
2000 / IEEE / 0-7803-6312-4
By: Siegert, R.; Mohammed, O.A.;
Parameters evaluation of ALA synchronous reluctance motor drives
2000 / IEEE
By: Arkadan, A.A.; Mohammed, O.A.; Isaac, F.N.;
Numerical prediction of magnetostrictive behavior in non-oriented electrical steel sheets
2001 / IEEE / 0-7803-6748-0
By: Mohammed, O.A.;
Coupled magnetoelastic finite element formulation of anisotropic magnetostatic problems
2001 / IEEE / 0-7803-6748-0
By: Mohammed, O.A.;
Hardware implementation of a real-time electromagnetic field analysis system for engineering education
2001 / IEEE / 0-7803-6748-0
By: Mohammed, O.A.; Roig, G.; Castro, J.;
A multi-step method for 3-D nonlinear transient eddy current problems
2001 / IEEE
By: Yao Yingying; Xie Dexin; Wang Jinming; Mohammed, O.A.;
Coupled magnetoelastic finite element formulation including anisotropic reluctivity tensor and magnetostriction effects for machinery applications
2001 / IEEE
By: Mohammed, O.A.; McConnell, R.; Calvert, T.;
A modified solution for large sparse symmetric linear systems in electromagnetic field analysis
2001 / IEEE
By: Yao Yingying; Xie Dexin; Wang Jinming; Mohammed, O.A.;
On the creation of a generalized design optimization environment for electromagnetic devices
2001 / IEEE
By: Mohammed, O.A.; Alhalabi, B.; Lean, M.H.; Lowther, D.A.;
Multi-objective genetic-fuzzy optimal design of PI controller in the indirect field oriented control of an induction motor
2001 / IEEE
By: Moallem, M.; Mirzaeian, B.; Mohammed, O.A.; Lucas, C.;
Computation of transient magneto-mechanical problems in electrical machines
2002 / IEEE / 0-7803-7252-2
By: Mohammed, O.A.; Ganu, S.C.; Liu, S.;
Transient modeling of coupled magnetoelastic problems in electric machines
2002 / IEEE / 0-7803-7518-1
By: Petersen, L.; Calvert, T.E.; Mohammed, O.A.; McConnell, R.;
Recording field analysis of narrow-track SPT head with side-shields
2003 / IEEE / 0-7803-7746-X
By: Mohammed, O.A.; Watanabe, H.; Matsubara, R.; Kanai, Y.; Nakamura, Y.; Muraoka, H.;
FEM analysis and testing of magnetostrictive effects in electrical samples for machinery applications
2003 / IEEE / 0-7803-7989-6
By: Mohammed, O.A.; Liu, S.; Ganu, S.C.;
Field-oriented vector control of synchronous motors with additional field winding
2004 / IEEE
By: Mohammed, O.A.; Saleh, K.I.; Badr, M.A.;
Effect of Increasing Pole Number on the Harmonic Content of Air-gap Flux Density Waveforms in Electric Machines
2004 / IEEE / 0-7803-8368-0
By: Abed, N.; Liu, S.; Mohammed, O.A.;
Hardware Implementation of a Real-Time Electromagnetic Field Analysis System for Engineering Educational Purposes
2004 / IEEE / 0-7803-8368-0
By: Mohammed, O.A.; Castro, J.; Roig, G.;
Numerical analysis of magnetostrictive effects in an electrical steel sample including experimental testing
2004 / IEEE / 0-7803-8368-0
By: Liu, S.; Ganu, S.C.; Mohammed, O.A.;

Next Page
Return To Top